31130 Steinel America, 31130 Datasheet - Page 3
![GLUE HOTMELT HIPUR PLY 30SEC SET](/photos/15/53/155381/mfg_31130_sml.jpg)
31130
Manufacturer Part Number
31130
Description
GLUE HOTMELT HIPUR PLY 30SEC SET
Manufacturer
Steinel America
Series
HiPURr
Type
Adhesive Cartridger
Specifications of 31130
Features
30 Second Set Time
For Use With/related Products
Wood to Wood
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
WW30
CLEAN-UP:
Spread absorbent over spill and shovel product/absorbent mixture into
an approved container. If product has dried, scrape up and place in an
approved container. Do not make pressure tight.
EMERGENCY MEASURES:
Isolate hazard area.
entering area.
(PPE) (see Section 8).
SECTION 7 - HANDLING AND STORAGE
HANDLING:
In accordance with good manufacturing practices, good ventilation of
the processing area is recommended. Gloves are recommended as product
is difficult to remove from effected areas if contact with skin
occurs.
STORAGE:
Store in tightly closed containers to protect from atmospheric
moisture. Replace outage with inert nitrogen. Store at temperature of
75F to 105F.
SECTION 8 - EXPOSURE CONTROLS AND PERSONAL PROTECTION
Occupational Exposure Limits
4,4'-diphenylmethane diisocyanate
The ACGIH TLV for 4,4'-diphenylmethane diisocyanate is .005 ppm. The
OSHA Ceiling for 4,4'-diphenylmethane diisocyanate is .02 ppm.
The OSHA Ceiling for 4,4'-diphenylmethane diisocyanate is 0.02 ppm
ENGINEERING CONTROLS:
Provide general and/or local exhaust ventilation to control airborne
levels below the exposure guidelines.
RESPIRATORY PROTECTION:
Atmospheric levels should be maintained below the exposure guidelines.
For emergency and other conditions where an exposure guidelines may be
exceeded, use an approved positive-pressure self contained breathing
apparatus or supplied air respirator with an auxiliary self-contained
air supply.
EYE PROTECTION:
Use safety glasses.
SKIN PROTECTION:
Use impervious materials made of butyl or nitrile rubber where skin
contact may occur.
GENERAL:
Safety shower and eye wash station.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Form:
Appearance/Color:
Odor:
Solubility (in water):
pH Value:
Boiling Range/Point:
Evaporation Rate:
% Volatile:
Specific Gravity:
VOC:
SECTION 10 - STABILITY AND REACTIVITY
ACGIH TLV
N/est
Wear all appropriate personal protection equipment
Keep unnecessary and unprotected personnel from
ACGIH TLV-C
N/est
Solid
White in solid state
Mild
Nil
Not Applicable
Not Applicable
Slower than n-Butyl Acetate
Not Applicable
1.17
0 g/l
ACGIH STEL
N/est
OSHA STEL
N/est
OSHA PEL
N/est