RTV162-300ML MG Chemicals, RTV162-300ML Datasheet - Page 4

• Manufacturer Part Number: RTV162-300ML
• Description: ADHESIVE SEAL SIL NON-CORROSIVE
• Manufacturer: MG Chemicals
• Series: RTVr
• Type: Potting Compound, 1 Partr

Specifications of RTV162-300ML

• Product: Silicones
• Size: 10 oz
• Application: Bond capacitors, resistors and integrated circuits to PCBs seals exposed wires, faying surfaces, connectors
• Chemical Component: Silicone
• Color: White
• Dielectric Strength: 19.7 KV⁄mm
• Dispensing Method: Cartridge
• Elongation: 400%
• Hardness: 35 (Shore A)
• Primary Type: Adhesive
• Special Features: Non-Corrosive
• Specific Gravity: 1.09
• Standards: UL Recognized
• Temperature Range: -60 to +205 °C
• Temperature, Rating: -60 to +205 °C
• Tensile Strength: 3.73 MPa
• Thermal Conductivity: 0.21 W⁄m.°K
• Time, Cure: 2 Days
• Time, Setting: 4 hrs.
• Viscosity: 350 g⁄Minute
• Volume Resistivity: 3 x 10^15 Ohm.cm
• Weight: 10 Oz.
• Main Industry: Electronics
• For Use With/related Products: Non Corrosive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS
RESPIRATORY PROTECTION
PROTECTIVE GLOVES
EYE AND FACE PROTECTION
OTHER PROTECTIVE EQUIPMENT
Exposure Guidelines
Absence of values indicates none found
PEL - OSHA Permissible Exposure Limit; TLV - ACGIH Threshold Limit Value; TWA - Time Weighted Average
OSHA revoked the Final Rule Limits of January 19, 1989 in response to the 11th Circuit Court of Appeals decision (AFL-CIO v. OSHA)
effective June 30, 1993. See 29 CFR 1910.1000 (58 FR 35338).
9. PHYSICAL AND CHEMICAL PROPERTIES
BOILING POINT - C & F:
VAPOR PRESSURE (20 C) (MM HG):
VAPOR DENSITY (AIR=1):
FREEZING POINT:
MELTING POINT:
PHYSICAL STATE:
ODOR:
COLOR:
EVAPORATION RATE (BUTYL ACETATE=1):
SPECIFIC GRAVITY (WATER=1):
DENSITY:
ACID / ALKALINITY (MEQ/G):
pH:
RTV162 12C-Crtrg (0.725LBS-0.329KG)
POLYDIMETHYLSILOXANE SEALANT
Component
Eyewash stations; Showers; Ventilation and other forms of engineering controls are preferred for
controlling exposures. Respiratory protection may be needed for non-routine or emergency situations.
If exposure limits are exceeded or respiratory irritation is experienced, NIOSH/MSHA approved
respiratory protection should be worn. Supplied air respirators may be required for non-routine or
emergency situations. Respiratory protection must be provided in accordance with OSHA regulations
(see 29CFR 1910.134).
Impermeable or chemical resistant gloves.
Safety glasses
Wear suitable protective clothing and eye/face protection.
CAS RN
Page 4/8
Source
No data available
No data available
No data available
No data available
No data available
Solid
sweet
White
Unknown
ca. 1.085
ca. 1.085 g/cm3
No data available
No data available
Material Safety Data Sheet
Value
Version: 1.5
10/29/2007