35 WHITE (3/4"X66') 3M, 35 WHITE (3/4"X66') Datasheet - Page 2

• Manufacturer Part Number: 35 WHITE (3/4"X66')
• Description: TAPE ELECTRICAL VINYL 3/4" WHITE
• Manufacturer: 3M
• Series: Scotch® 35r
• Type: Electricalr

Specifications of 35 WHITE (3/4"X66')

• Tape Type: Electrical
• Adhesive: Rubber
• Backing, Carrier: PVC (Poly Vinyl Chloride)
• Thickness: 0.0070" (7.0 mils, 0.178mm)
• Width: 0.75" (19.05mm) 3/4"
• Length: 66' (20.1m) 22 yds
• Color: White
• Usage: Color Coding
• Temperature Range: 176°F (80°C)
• Adhesion To Backing: 20 Oz.-in.
• Adhesion To Steel: 20 Oz-in.
• Elongation: 225%
• Length, Tape: 66 ft.
• Material, Tape: PVC
• Standards: UL Listed and CSA Certified
• Temperature Rating: +80 °C
• Thickness, Tape: 0.178 mm
• Voltage, Rating: 600 V
• Width, Tape: 3⁄4 in.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 054007-10828; 3M35-WH; 80610833982

3.0
Note: These are typical values and should not be
4.0
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/elpd
Voltage Rating
UL 510
Dielectric Strength
ASTM D1000
Standard Condition
High Humidity
Condition
Insulation Resistance
ASTM D1000
(High Humidity megohms
Method)
Electrical Properties
used for specification purposes.
Specifications
Product
The tape is based on polyvinyl chloride
(PVC) and/or its copolymers and has a
rubber-based, pressure-sensitive adhesive.
The tape shall be 7 mils thick, and be UL
Listed and marked per UL Standard 510 as
“Flame Retardant and Weather Resistant.”
The tape shall be compatible with synthetic
cable insulations, jackets and splicing
compounds. The tape will remain stable and
will not telescope more than 0.1 inches
when maintained at temperatures below
120°F (50°C).
600 Volts
1250 v/mil
90% of Std. Condition
>1 x 10
6
5.0
6.0
7.0
Installation Techniques
The tape shall be applied in half-lapped
layers with sufficient tension to conform and
produce a uniform covering. In most
applications, this tension will reduce the
width of the tape to approximately 5/8 of its
original width. On pigtail splice, the tape
should be wrapped beyond the end of the
wire and then folded back, leaving a
protective cushion to resist cut-through.
Wrap tape uphill, taping from a smaller
diameter surface to a larger diameter
surface. Apply the tape with no tension on
the last wrap to prevent flagging.
Shelf Life
Scotch 35™ Vinyl Electrical Color Coding
Tape complies with the requirements of UL
510 for storage. It has a 5-year shelf life
(from the date of manufacture) when stored
under the following conditions. Store behind
present stock in a clean dry place at a
temperature of 70°F and 40-50% relative
humidity. Good stock rotation is also
recommended.
Availability
Scotch 35 Vinyl Electrical Color Coding
Tape is available from your local 3M
distributor in the following standard roll
sizes:
Other lengths and widths are available by
special request.
•
•
3/4 in. x 66 ft.
1/2 in. x 20 ft.