4026-1"X36YD 3M, 4026-1"X36YD Datasheet - Page 4

• Manufacturer Part Number: 4026-1"X36YD
• Description: TAPE DOUBLE SIDED FOAM 1/16 X 1"
• Manufacturer: 3M
• Series: 4026r

Specifications of 4026-1"X36YD

• Tape Type: Double Coated, Double Sided
• Adhesive: Acrylic, 100
• Backing, Carrier: Polyurethane Foam
• Thickness: 0.063" (63 mils, 1.600mm) 1/16"
• Width: 1.00" (25.40mm)
• Length: 108' (32.9m) 36 yds
• Color: Natural
• Usage: Holding, Joining, Mounting
• Temperature Range: 70 ~ 100°F (21 ~ 38°C)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 021200-17057; 2120017057; 21200170577; 3M4026; 4026 1"; 4026 (1/16X1"); 4026 1"; 70-0060-6787-3; 70006067873

Application Techniques
Application Ideas
3M
4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085
Features
™
Double Coated Urethane Foam Tapes
• Bond strength is dependent upon the amount of adhesive-to-surface contact
• To obtain optimum adhesion, the bonding surfaces must be clean, dry and well
• Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial
*Note: Be sure to follow the manufacturer’s precautions and directions for use when
The urethane foam tapes are generally ideal for interior applications or for exterior
applications where the tape will be protected from the environment. The urethane
foam is open cell.
3M™ Double Coated Urethane Foam Tape 4004 – Mount interior signs and nameplates
3M™ Double Coated Urethane Foam Tape 4008 – Bond acoustic panels to walls
3M™ Double Coated Urethane Foam Tape 4016 – Mount interior signs and nameplates
3M™ Double Coated Urethane Foam Tape 4026 – Mount air fresheners and soap dispensers
3M™ Double Coated Urethane Foam Tape 4032 – Attach wire clips to various surfaces
3M™ Double Coated Urethane Foam Tape 4052 – Bond window to microwave oven doors
3M™ Double Coated Urethane Foam Tape 4056 – Mount wall corner protectors
3M™ Double Coated Urethane Foam Tape 4085 – Attach wire clips
• The natural colored urethane foam tape products vary in color from white to light
• 3M™ Double Coated Urethane Foam Tape 4026 is available in roll form and die-
• 3M™ Double Coated Urethane Foam Tape 4085 combines conformability with
developed. Firm application pressure helps develop better adhesive contact and
improve bond strength.
unified. Typical surface cleaning solvents are isopropyl alcohol* and water (rubbing
alcohol) or heptane.
tape application to surfaces at temperatures below 50°F (10°C) is not recommended
because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.
yellow. The color will change to light yellow upon exposure to sunlight (ultraviolet
radiation). This color change is normal and does not affect tape performance.
cut pieces. Die-cut pieces of 3M tape 4026 is available in 3/4" or 1" squares, either
individual pieces double linered with an extended liner on one side or in pads of 48
squares.
high immediate adhesion to most plastics including ABS, polycarbonate, acrylic,
polyethylene and polypropylene as well as metal and paint. 3M tape 4085 tears
easily which makes it ideal for hand application.
using solvents.
- 4 -
Mount electrical channel to wall surfaces
Attach air fresheners