35 GRAY (3/4"X66') 3M, 35 GRAY (3/4"X66') Datasheet - Page 7
35 GRAY (3/4"X66')
Manufacturer Part Number
35 GRAY (3/4"X66')
Description
TAPE ELECTRICAL VINYL 3/4" GRAY
Manufacturer
3M
Series
Scotch® 35r
Type
Electricalr
Specifications of 35 GRAY (3/4"X66')
Tape Type
Electrical
Adhesive
Rubber
Backing, Carrier
PVC (Poly Vinyl Chloride)
Thickness
0.0070" (7.0 mils, 0.178mm)
Width
0.75" (19.05mm) 3/4"
Length
66' (20.1m) 22 yds
Color
Gray
Usage
Color Coding
Temperature Range
176°F (80°C)
Adhesion To Backing
20 Oz.-in.
Adhesion To Steel
20 Oz-in.
Elongation
225%
Length, Tape
66 ft.
Material, Tape
PVC
Standards
UL Listed and CSA Certified
Temperature Rating
+80 °C
Thickness, Tape
0.178 mm
Voltage, Rating
600 V
Width, Tape
3⁄4 in.
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Thickness - Adhesive
-
Thickness - Backing, Carrier, Liner
-
Other names
054007-00072
3M35-GY
80610834063
3M35-GY
80610834063
INTERNATIONAL REGULATIONS
Contact 3M for more information.
NFPA Hazard Classification
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.
HMIS Hazard Classification
Hazardous Material Identification System (HMIS(r)) hazard ratings are designed to inform employees of chemical hazards in the workplace. These
ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency
situations. HMIS(r) ratings are to be used with a fully implemented HMIS(r) program. HMIS(r) is a registered mark of the National Paint and
Coatings Association (NPCA).
Reason for Reissue: The MSDS has been revised because 3M has adopted the 16-section ANSI/ISO format. The potential hazards
of the product have not changed. We encourage you to reread the MSDS and review the information.
Revision Changes:
Section 1: Product name was modified.
Copyright was modified.
Page Heading: Product name was modified.
Section 2: Ingredient table was added.
Section 15: EPCRA 313 information was added.
Section 15: EPCRA 313 text was added.
Section 8: Exposure guidelines ingredient information was added.
Section 8: Exposure guidelines data source legend was added.
Section 3: Carcinogenicity table was added.
Section 3: Carcinogenicity heading was added.
Section 15: California proposition 65 ingredient information was added.
Section 15: California proposition 65 heading was added.
Section 15: California proposition 65 cancer warning was added.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
_________________________________________________________________________________________________
MATERIAL SAFETY DATA SHEET Scotch(r) 35 Vinyl Electrical Tape
SECTION 16: OTHER INFORMATION
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
WHMIS: Hazardous
Health: 0 Flammability: 1
Health: 0 Flammability: 0
Reactivity: 0
Reactivity: 0 Special Hazards: None
Protection: X - See PPE section.
06/26/09
Page 7 of 8