880-24MMX55M 3M, 880-24MMX55M Datasheet - Page 5

• Manufacturer Part Number: 880-24MMX55M
• Description: TAPE SCOTCH FILAMENT 24MMX55M
• Manufacturer: 3M
• Series: Scotch® 880r

Specifications of 880-24MMX55M

• Tape Type: Filament
• Adhesive: Pressure Sensitive Adhesive (PSA)
• Backing, Carrier: Scotchpro™ film
• Thickness: 0.0077" (7.7 mils, 0.196mm)
• Width: 0.94" (24.00mm)
• Length: 180' (55.0m) 60 yds
• Color: Clear
• Usage: General Purpose
• For Use With: H123 - TAPE DISPENSER 3" WIDE 3" COREH122 - TAPE DISPENSER HAND - 48MM WIDTHH120 - APPLICATOR METAL 1" WIDE MAXH12 - APPLICATOR PERFORM 1" WIDE MAXH10 - APPLICATOR ECONOMY 1" WIDE MAX
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Temperature Range: -
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 00021200398278; 02120039827; 2120039827; 21200398278; 70006248960; 88024MMX55M

3M MATERIAL SAFETY DATA SHEET 3M(TM) SCOTCH(r) FILAMENT TAPE 880
SECTION 14:TRANSPORT INFORMATION
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - No Delayed Hazard - No
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS),
or are exempt polymers whose monomers are listed on EINECS.
The components of this product are in compliance with the chemical notification requirements of TSCA.
This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory listing requirements.
Contact 3M for more information.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.
Revision Changes:
Section 1: Product name was modified.
Since regulations vary, consult applicable regulations or authorities before disposal.
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Health: 0 Flammability: 1 Reactivity: 0 Special Hazards: None
09/26/2003
Page 5 of 6