6969 2" BLACK 3M, 6969 2" BLACK Datasheet - Page 3

• Manufacturer Part Number: 6969 2" BLACK
• Description: TAPE DUCT CLOTH 2" X 60YDS BLACK
• Manufacturer: 3M
• Series: 6969r

Specifications of 6969 2" BLACK

• Tape Type: Duct Cloth
• Adhesive: Rubber
• Backing, Carrier: Polyethylene Film
• Thickness: 0.0107" (10.7 mils, 0.272mm)
• Width: 2.00" (50.80mm)
• Length: 180' (55.0m) 60 yds
• Color: Black
• Usage: General Purpose
• Temperature Range: 200°F (93°C)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 3M69692B; 70006250230

3M MATERIAL SAFETY DATA SHEET 3M 6969 Duct Tapes, Black, Gray, and Olive
5.2 EXTINGUISHING MEDIA
Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam). Use fire extinguishers
with class B extinguishing agents (e.g., dry chemical, carbon dioxide).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: See Hazardous Decomposition section for products of combustion. Wear full protective
equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA).
Unusual Fire and Explosion Hazards: No unusual fire or explosion hazards are anticipated. Not applicable.
Accidental Release Measures: Not applicable. Ventilate the area with fresh air.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical under
normal use conditions. Avoid eye contact with vapors, mists, or spray.
7.2 STORAGE
Store away from heat. Store out of direct sunlight. Not applicable.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
General ventilation adequate below 400 C. Local exhaust recommended above 400 C. Provide appropriate local exhaust for molten or
extruded material. Not applicable.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Not applicable. Avoid eye contact with vapors, mists, or spray.
8.2.2 Skin Protection
Gloves not normally required. Not applicable.
8.2.3 Respiratory Protection
Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
12/29/2003
Page 3 of 7