9482PC 3M, 9482PC Datasheet - Page 5

• Manufacturer Part Number: 9482PC
• Description: TAPE ADHESIVE TRANSFER 1"X 60YD
• Manufacturer: 3M
• Series: 9482PCr

Specifications of 9482PC

• Tape Type: Adhesive Transfer Tape
• Adhesive: Acrylic, 350
• Backing, Carrier: Polycoated Kraft Liner
• Thickness: 0.0062" (6.2 mils, 0.157mm)
• Thickness - Adhesive: 0.0020" (2.0 mils, 0.051mm)
• Thickness - Backing, Carrier, Liner: 0.0042" (4.2 mils, 0.107mm)
• Width: 1.00" (25.40mm)
• Length: 180' (55.0m) 60 yds
• Usage: Holding, Joining, Mounting
• Temperature Range: 300°F (149°C)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Other names: 00021200634758; 02120063475; 2120063475; 21200634758; 70006083607

3M
9442 • 9445 • 9482PC • 9485PC • 9485EK • 9675
For Additional
Information
Recognition/
Certification
Important Notice
Limitation of Remedies
and Liability
3
Converter Markets
Engineered Adhesives Division
3M Center, Building 551-1W-02
St. Paul, MN 55144-1000
TM
Adhesive Transfer Tapes with Adhesive 350
If the
REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE
3
consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence,
warranty, or strict liability.
This Engineered Adhesives Division product was manufactured under a 3M quality system registered to ISO 9002 standards.
To request additional product information or to arrange for sales assistance, call toll free 1-800-223-7427
or visit www.3M.com/converter. Address correspondence to:
Center, Building 220-7E-01, St. Paul, MN 55144-1000. Our fax number is 651-733-9175. In Canada,
phone: [phone]. In Puerto Rico, phone: [phone]. In Mexico, phone: [phone].
MSDS: 3M has not prepared a MSDS for these products which are not subject to the MSDS
requirements of the Occupational Safety and Health Administration’s Hazard Communication Standard,
29 C.F.R. 1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M
directions for use, these products should not present a health and safety hazard. However, use or
processing of these products in a manner not in accordance with the directions for use may affect their
performance and present potential health and safety hazards.
TSCA: These products are defined as articles under the Toxic Substances Control Act and therefore, are
exempt from inventory listing requirements.
UL: Tapes 9442 and 9445 have been recognized by Underwriters Laboratories Inc. under Standard UL
969 Marking and Labeling in File MH26206.
Tapes 9482PC and 9485PC have been recognized by Underwriters Laboratories Inc. under Standard UL
746C Polymeric Adhesives Systems, Electrical Equipment Component in File MH17478.
If you require official recognition of any 350 adhesive under either UL 969 or UL 746C, please contact
3M-customer service at 1-800-362-3550.
For more information on the UL Certification, please visit the website at http://www.3m.com/converter,
select UL Recognized Materials, and then select the specific product area.
3
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is
responsible for determining whether the
method of application. Please remember that many factors can affect the use and performance of a
product in a particular application. The materials to be bonded with the product, the surface preparation
of those materials, the product selected for use, the conditions in which the product is used, and the time
and environmental conditions in which the product is expected to perform are among the many factors
that can affect the use and performance of a
use and performance of a
control, it is essential that the user evaluate the
purpose and suitable for the user’s method of application.
M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or
M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
3
M product is proved to be defective, THE EXCLUSIVE REMEDY, AT
3
M product, some of which are uniquely within the user’s knowledge and
- 5 -
Recycled Paper
40% pre-consumer
10% post-consumer
3
M product is fit for a particular purpose and suitable for user’s
3
M product. Given the variety of factors that can affect the
ISO 9002
3
M product to determine whether it is fit for a particular
3
M Engineered Adhesives Division,
3
M’S OPTION, SHALL BE TO
Printed in U.S.A.
©3M 2002
70-0707-1191-9
3
M PRODUCT.
3
M
3
M
(9/02)