RAISLETAPE54 3M, RAISLETAPE54 Datasheet - Page 89

• Manufacturer Part Number: RAISLETAPE54
• Description: TAPE ROHS AISLE MARKING 54' ROLL
• Manufacturer: 3M

Specifications of RAISLETAPE54

• Tape Type: Marking - Printed "Lead-Free Area"
• Backing, Carrier: PVC (Poly Vinyl Chloride)
• Thickness: 0.0060" (6.0 mils, 0.152mm)
• Width: 3.00" (76.20mm) 1/4'
• Length: 54' (16.5m) 18 yds
• Color: White, Green Print
• Usage: Aisle Marking
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Temperature Range: -
• Adhesive: -
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 51111764688; 80000954547

3M
Notes:
* Suggest 4 square inches of fastener per pound of load as a starting point for evaluation
* The information provided is considered representative only for use in narrowing the
* User is responsible for determining whether the 3M product is fit for the desired end use.
* All 3M™ Dual Lock™ Piece parts are comprised completely of black polypropylene
Footnotes:
1) Type 400 is not recommended to be engaged to other type 400 fasteners. As well, type
2) The actual 3M™ Dual Lock™ area available for (dis)engagement may be less than the part
of long term performance. Suggest type 250 engaged to type 250 as a starting point for
evaluations. Tensile strength increases approximately in the following order: 170/250
<250/250 ≤ 170/400 < 250/400.
possibilities of 3M™ Dual Lock™ piece parts to be considered for further evaluation, and
should not be used for specification purposes.
Refer to specific product technical datasheets for more detailed product performance
information.
170 should not be engaged with type 170. Engagement strength is dependent upon the
area engaged and number of stems engaged.
dimension. This should be taken into consideration when designing how much 3M™ Dual
Lock™ will be required for a specific application.
Pine tree shaped push-in stem for insertion into wood and similar substrates over a range of thicknesses.
Single round cone shaped base for sliding into a key hole slot
Snap-in base for 6.5 x 10 mm rectangular hole
Snap-in base for slotted hole in 0.70 to 1.20 mm thick panel
™
Dual Lock
279
278
280
SJ3209
SJ3749
SJ3222
SJ3224
SJ3848
SJ3748
SJ3266
SJ3267
SJ3268
SJ3272
SJ3273
SJ3274
SJ3743
SJ3705
SJ3221
SJ3731
SJ3277
SJ3278
SJ3279
SJ3704
SJ3713
SJ3825
SJ3826
SJ3827
SJ3804
SJ3805
SJ3806
Product
number
™
– Piece Parts with Functional Bases
Product
Type
250
250
400
250
400
250
400
170
250
400
170
250
400
170
250
400
170
250
400
250
400
170
250
400
170
250
400
1
26 x 26 mm
26 x 26 mm
26 x 26 mm
26 x 26 mm
20 mm x 20 mm
20 mm x 20 mm
26 mm x 26 mm
26 x 26 mm
26 x 26 mm
26 x 26 mm
Dimensions
(length x width)
or diameter for
circular parts
2
Functional
Size/Area
square inches
(square cm)
0.62 (4.0)
1.04 (6.7)
1.04 (6.7)
1.04 (6.7)
1.04 (6.7)
0.62 (4.0)
1,04 (6.7)
1.04 (6.7)
1.04 (6.7)
1.04 (6.7)
3) Engaged thickness is for the shown product engaged to 3M™ Dual Lock™ Reclosable
Engaged
Thickness
inches (mm)
Fasteners SJ3781 (a type 250 Dual Lock™ with an acrylic adhesive backcoating). You
can mix products with different backcoatings (standard pressure sensitive adhesives or
via our 3M™ Dual Lock Mix and Match Program) to obtain a greater variety of engaged
thicknesses. Any of these 3M™ Dual Lock™ Reclosable Fasteners can be engaged with
3M™ Scotchmate™ Reclosable Fasteners, providing a quick grab closure with high
strength and limited life.
0.272 (6.91)
0.293 (7.44)
0.293 (7.44)
0.293 (7.44)
0.293 (7.44)
0.293 (7.44)
0.293 (7.44)
0.293 (7.44)
0.283 (7.19)
0,293 (7.44)
281
3
Fits key hole slot in a 2.65 mm thick panel that is 18 mm in
12 mm (0.49”) long base stem, designed to fit a
7.9 to 8.4 mm diameter hole.
12 mm long base stem, designed to fit a 7 to 7.5 mm
diameter hole.
16.5 mm long base stem, designed to fit a 7.9 to 8.4 mm
diameter hole.
12.74 mm long base stem, designed to
fit an 8.20 to 8.50 mm diameter hole.
White version of SJ3266.
White version of SJ3267.
White version of SJ3268.
Fits key hole slot 3.1-3.25 mm thick panel that is 18 mm in
diameter. The shaft (stem of the cone) is 3.25 mm tall
and 4 mm wide.
diameter. The shaft (stem of the cone) is 2.65 mm tall
and 4 mm wide.
Fits key hole slot in a 3 mm thick panel that is 14 mm in
diameter. The shaft (stem of the cone)
is 3 mm tall and 4 mm wide.
Fits a 1.30 to 1.59 mm thick panel.
Fits a 0.71 to 0.91 mm thick panel.
Fits a 0.70 to 1.00 mm thick sheet metal
5.35 ± .05 mm x 21.25 + .00/- .15 mm slot.
Fits a 1.00 to 1.20 mm thick sheet metal
6.00 ± .05 mm x 21.25 + .00/- .15 mm slot.
Comments
89