46911 Desco, 46911 Datasheet
46911
Manufacturer Part Number
46911
Description
TAPE CLEAR ESD W/SYMBOLS 72 YDS
Manufacturer
Desco
Datasheet
1.46900.pdf
(1 pages)
Specifications of 46911
Tape Type
Antistatic - ESD Symbols
Adhesive
Rubber
Backing, Carrier
Cellulose
Thickness
0.0024" (2.4 mils, 0.061mm)
Width
1.00" (25.40mm)
Length
216' (66.0m) 72 yds
Color
Clear
Usage
General Purpose
Temperature Range
14 ~ 160°F (-10 ~ 71°C)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Thickness - Adhesive
-
Thickness - Backing, Carrier, Liner
-
© 2007 DESCO INDUSTRIES INC.
Employee Owned
*Wescorp is a Desco Industries brand.
46911
1/4" is 6 mm nominal or 0.236"
1/2" is 12 mm nominal or 0.472"
3/4" is 18 mm nominal or 0.709"
1"
2"
Tape widths are nominal
metric ±0.8 mm (±1/32").
is 24 mm nominal or 0.945"
is 48 mm nominal or 1.890"
46900
The user must determine the suitability
for use of an antistatic tape for his
particular application.
46915
No sulfur, surfactants or
silicone based material
(adhesive, film backing,
release material) is
used in the manufacture
of our cellulose tape.
Tape is wound on a low-
sloughing plastic core.
RoHS Compliance Statement
None of the following materials are
intentionally added in manufacturing
this product: lead, mercury, cadmium,
hexavalent chromium, polybrominated
biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE) as outlined in
the Directive 2002/95/EC Article 4.1.
See Protektive Pak Inc. letter on-line at
ProtektivePak.com.
Antistatic Cellulose Tape
For general purpose applications
• 2.4 mil (0.06 mm) total thickness
• Cellulose film resistance 10E10 - 10E11 ohms
• Rubber based adhesive absorbs moisture
• Adhesive surface resistance 10E10 - 10E11 ohms
• Temperature Range -10°C - 71°C (14°F - 160°F);
• Available in clear, clear with ESD symbols, and
meets MIL-B-81705 of 100°C for 10 min max
clear with ESD symbols with yellow stripe. Marking
is approved symbols of Mil STD-1285* and ESD
Association.
Symbols printed in between film and adhesive; will not rub off.
Tape
Antistatic Clear Cellulose
Antistatic Clear Cellulose
with Symbols
Antistatic Clear Cellulose
w/Symbols w/Yellow Stripe 46913
WESCORP* ANTISTATIC CELLULOSE TAPE
PROTEKTIVE PAK
13520 MONTE VISTA AVENUE, CHINO, CA 91710
PHONE (909) 627-2578, FAX (909) 363-7331
www.protektivepak.com
Note: For best results, tape inventory should be continually replenished. It is
recommended that rolls of tape be stored flat and rotated (flipped over to the
other side) periodically. Tapes should be stored in a dry, well ventilated room
with a reasonably consistent temperature of 68°F (20°C) and be protected
from exposure to direct sunlight. Tape should not be stored in ultraviolet
sunlight, moisture, or heat. See Limited Warranty; Protektive Pak expressly
warrants that for a period of one (1) year from the date of purchase, our
Wescorp Brand Antistatic Tape will be free of defects in material (parts) and
workmanship (labor). Tape over one year old should be evaluated by the user
to determine acceptability for the user's application.
*Military organizations sometimes use MIL-STD-1285 for hardware marking and that
document once required the use of the "three arrows in a circle" symbol. That symbol
has been changed for consistency with industry marking to the "hand in triangle" ESD
Susceptibility symbol. (Ref: TR20.20 section 5.3.14.1)
46900
46903
46909
0.5"
46901
46904
46910
46914
.75"
Width
46902
46905
46911
46915
1"
46906
46912
46916
2"
Imprint on Clear Cellulose
w/Symbols w/Yellow Stripe
Imprint on Clear Cellulose
DRAWING NUMBER
Width tolerance ±1/32"
Core
Antistatic Tape
Antistatic Tape
with Symbols
1"
3"
3"
3"
46900
Length
36 yds
72 yds
72 yds
72 yds
DATE:
6/07