CM2009-00QR ON Semiconductor, CM2009-00QR Datasheet - Page 3

• Manufacturer Part Number: CM2009-00QR
• Description: VGA PORT COMPANION-65 OHM QSOP16
• Manufacturer: ON Semiconductor
• Type: The CM2009 connects between a video graphics controller embedded in a PC, graphics adapter card or set top box and the VGA or DVI-I port connector.r

Specifications of CM2009-00QR

• Voltage - Working: 6V
• Voltage - Clamping: 6V
• Technology: Diode Array
• Power (watts): 500mW
• Number Of Circuits: 1
• Applications: General Purpose
• Package / Case: 16-QSOP
• Operating Supply Voltage: - 0.5 V to + 6 V
• Supply Current: 10 uA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Number Of Channels: 7
• Operating Temperature (min): -40C
• Operating Temperature Classification: Industrial
• Operating Temperature (max): 85C
• Package Type: QSOP
• Rad Hardened: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

CM2009
Ordering Information
Pin Description
LEAD(s)
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
65Ω
15Ω
R
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
OUT
SYNC_OUT1
SYNC_OUT2
DDC_OUT1
DDC_OUT2
SYNC_IN1
SYNC_IN2
VIDEO_1
VIDEO_2
VIDEO_3
DDC_IN1
DDC_IN2
V
V
NAME
V
GND
CC_VIDEO
BYP
CC_SYNC
CC_DDC
Pins
16
16
DESCRIPTION
This is an isolated supply input for the SYNC_1 and SYNC_2 level shifters and their
associated ESD protection circuits.
This is a supply pin specifically for the VIDEO_1, VIDEO_2 and VIDEO_3 ESD protection
circuits.
Video signal ESD protection channel. This pin is typically tied one of the video lines between
the VGA controller device and the video connector.
Video signal ESD protection channel. This pin is typically tied one of the video lines between
the VGA controller device and the video connector.
Video signal ESD protection channel. This pin is typically tied one of the video lines between
the VGA controller device and the video connector.
Ground reference supply pin.
This is an isolated supply input for the DDC_1 and DDC_2 level-shifting N-FET gates.
This input is used to connect an external 0.2uF bypass capacitor to the DDC circuits,
resulting in an increased ESD withstand voltage rating ±8kV with vs. ±4kV without).
DDC signal output. Connects to the video connector side of one of the sync lines.
DDC signal input. Connects to the VGA controller side of one of the sync lines.
DDC signal input. Connects to the VGA controller side of one of the sync lines.
DDC signal output. Connects to the video connector side of one of the sync lines.
Sync signal buffer input. Connects to the VGA controller side of one of the sync lines.
Sync signal buffer output. Connects to the video connector side of one of the sync lines.
Sync signal buffer input. Connects to the VGA controller side of one of the sync lines.
Sync signal buffer output. Connects to the video connector side of one of the sync lines.
PART NUMBERING INFORMATION
Rev. 3 | Page 3 of 8 | www.onsemi.com
Package
PIN DESCRIPTIONS
QSOP
QSOP
Ordering Part Number
CM2009-00QR
CM2009-02QR
1
CM2009 00QR
CM2009 02QR
Part Marking