MT5600BA-V92-GB/IE Multi-Tech Systems, MT5600BA-V92-GB/IE Datasheet - Page 4
![no-image](/images/no-image-200.jpg)
MT5600BA-V92-GB/IE
Manufacturer Part Number
MT5600BA-V92-GB/IE
Description
MODEM V.92 DATA/FAX WORLD
Manufacturer
Multi-Tech Systems
Series
MultiModem® IIr
Datasheets
1.SF100-G.pdf
(4 pages)
2.MT5656ZDX-EU.pdf
(55 pages)
3.MT5600BA-V92-NPS.pdf
(2 pages)
4.MT5600BA-V92-NPS.pdf
(8 pages)
5.MT5600BA-V92-NPS.pdf
(58 pages)
Specifications of MT5600BA-V92-GB/IE
Data Format
V.92
Interface
RS-232
Voltage - Supply
9 V ~ 12 V
Mounting Type
Desktop
Package / Case
9.0" L x 6.2" W x 1.4" H (229mm x 158mm x 36mm)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
881-1059
MultiModem II Quick Start Guide
4
Connect the Modem to Your PC
Connect the Modem to the Telephone Line (Dialup Connection)
Two-Wire or Four-Wire Leased Line Connection
Connect the Phone to the Modem (Optional)
Connect the Modem to the AC Power Outlet
Power-On Test
Plug one end of the serial cable into the modem’s RS-232
connector.
Plug the other end into your PC’s serial port connector (COM1 or
COM2).
Plug one end of the phone cable into the modem’s LINE jack.
Plug the other end into a public switched telephone network
(PSTN) wall jack.
Important:
interchangeable. Do not plug the phone into the LINE jack and
do not plug the leased line cable into the PHONE jack.
Note:
equipment connected to public telephone systems.
Plug one end of a two-wire/four-wire phone cable into the modem’s
LEASED jack.
Connect the other end to a leased line wall jack or terminals.
For voice calls, plug a telephone into the modem’s PHONE jack.
Plug the power transformer into an AC power outlet or power strip.
Plug the power transformer’s cable into the POWER jack on the
modem. Use only the power transformer supplied with the modem.
Use of any other transformer voids the warranty and can damage
the modem.
Test the modem by turning it on (a power switch is located on the
front panel). When you apply power, the modem performs a di-
agnostic self-test, indicated by the TM indicator lighting for a few
seconds, after which the LCD should light. If this does not happen,
check that the power switch is on, the power transformer is solidly
connected, and the AC outlet is live. If these measures do not work,
see the “Troubleshooting” chapter in the User Guide.
Regulatory agencies may impose certain restrictions on
The LINE jack and PHONE jack are not
Multi-Tech Systems, Inc.