039-0247-000 ITT Cannon, 039-0247-000 Datasheet - Page 57

• Manufacturer Part Number: 039-0247-000
• Description: DL3-60R COVER
• Manufacturer: ITT Cannon

Specifications of 039-0247-000

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: I039-0247-000

56
ZIF Connectors
Assembly Instructions for Crimp Contacts
Contact Insertion:
All crimp contacts are inserted by hand. No tooling
is required for either the plug or receptacle.
Caution:
Caution: Do not force contacts into contact
cavities.
resistance during installation remove and re-insert
using a slight up and down motion. This will assure
positive cavity alignment. Do not install contact if
plug is in the closed or actuated position.
Plug:
Step 1. Prior to inserting contacts, turn the shaft
counter-clockwise to its maximum open position.
Step 2. With the retention lance positioned away
from the shaft, insert contacts from the rear of the
plug.
Receptacle:
Step 1. With the retention lance positioned toward
the shaft hole, insert contacts from the rear of the
receptacle.
Contact Removal for Crimp Contacts
Tool: CET-DL10
Release retention lance by inserting tip of
extraction tool into cavity until it bottoms on
insulator shoulder. Gently pull wire in direction of
arrow, see illustration, to remove contact from
insulator.
If
contact
encounters
excessive
RETENTION
CAM
LANCE
(TOP)
CONNECTOR
PLUG
RETENTION
(BOTTOM)
LANCE
RECEPTACLE
CONNECTOR
Tools and Assembly
POLARIZING
POST
RETENTION
CONTACT
LANCE
Dimensions are shown in mm (inch)
Dimensions subject to change
RETENTION
RETENTION
LANCE
(BOTTOM)
(TOP)
SCREW
LANCE