uEZGUI-2478-43WQS FDI, uEZGUI-2478-43WQS Datasheet - Page 3

• Manufacturer Part Number: uEZGUI-2478-43WQS
• Description: Display Modules & Development Tools uEZ GUI LPC2478 Dev 4.3 WQVGA Touch LCD
• Manufacturer: FDI

Specifications of uEZGUI-2478-43WQS

• Description/function: WQVGA Touch LCD Kit
• Interface Type: USB, JTAG
• Maximum Supply Current: 330 mA
• Module Size (w X H X T): 4.6 in x 2.84 in x 0.545 in
• Operating Current: 200 mA
• Operating Supply Voltage: 5 V
• Operating Voltage: 5 V
• Pixel Format: 480 x 272
• Product: Display Modules
• Software: Software Included
• Touch Panel: Touch Panel
• Viewing Area (w X H): 4.6 in x 2.84 in
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

At this point the unit is ready for software demonstrations and user operation.
The uEZGUI will appear as a USB Flash Drive to the PC, thus allowing the user to read and write files directly to the
Micro SD card.
4. Demonstration Software Main Menu
The Demonstration Software has the following options:
Setting up a slideshow:
The Slideshow demonstration loads and scrolls between images provided on a micro SD card. Images must be in 24
bit uncompressed Targa (.TGA) format. Adobe Photoshop and many other graphics programs can save images in this
format. The images must be 480x272 and 13.23”x7.5” in size and use the file names WQSLIDExx.TGA where xx is 00
thru 99. (i.e. WQSLID01.tga, WQSLID02.tga, etc)
Slideshow
Selecting the slideshow icon will cause the Micro SD card to be read. This demonstration allows the user to select
between several example slideshow options such as “Introduction to uEZ GUI”, “Demonstration Pictures”, “FDI
Overview”, “Strategic Partners”, etc. Select the play button to begin the automated slide show or manually “drag” a
stylus or finger at least half way across the screen. After approximately 30 seconds of inactivity the slideshow will
begin to auto scroll. The user can regain manual control at any time by “dragging” forward or backwards to the next
slide. Click on the “X “to return to the main menu.
Under the “Apps” Icon are the following programs:
Accelerometer
Selecting this icon demonstrates the accelerometer feature by moving a simulated ball across the screen as the
CARRIER board is tilted along the X and Y axis. To return to the main menu touch the exit icon.
The following screens should appear once power has been applied to the kit:
2