EA DOGXL160E-7 ELECTRONIC ASSEMBLY, EA DOGXL160E-7 Datasheet - Page 8

• Manufacturer Part Number: EA DOGXL160E-7
• Description: LCD Graphic Display Modules & Accessories STN (+) Transmissive Yel/Grn Backround
• Manufacturer: ELECTRONIC ASSEMBLY

Specifications of EA DOGXL160E-7

• Pixel Density: 160 x 104
• Fluid Type: STN
• Module Size (w X H X T): 78 mm x 61 mm x 2.8 mm
• Viewing Area (w X H): 72 mm x 45 mm
• Backlighting: Yellow / Green
• Background Color: Yellow / Green
• Operating Temperature Range: - 20 C to + 70 C
• Interface: SPI
• Display Mode: Transmissive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EA DOG
Page 8
DIMENSIONS EA DOG
DIMENSIONS EA LED78X64
MOUNTING / ASSEMBLING
First, clip the display and backlight modules together by gently pushing the display pins through the
corresponding holes on the backlight module. Then insert the entire module into the socket, or into
the soldering holes on the pcb. The backlight pins (6 pins at the bottom) must be soldered on the top
side as well to ensure good contact between the modules.
Important:
- The display has 2 protective films on the top and the bottom, and there is also one on the backlight.
- LC displays are generally not suited for wave or reflow soldering. Temperatures of over 80°C can
- Make sure that either display nor backlight will never come into contact with any kind of liquid like
Zeppelinstrasse 19 · D-82205 Gilching · Phone [phone] · Fax: [phone] · www.lcd-module.de · [e-mail]
All these must be removed while or after assembling.
cause permanent damage.
Fluxer, Cleaner, Water.
XL160-
XL
7
160-7
ELECTRONIC ASSEMBLY reserves
the right to change specifications
without prior notice. Printing and
typographical
all dimensions are in mm
handling precautions!
errors
ATTENTION
reserved.