PT-39-G-C21-MPB Luminus Devices, PT-39-G-C21-MPB Datasheet
PT-39-G-C21-MPB
Specifications of PT-39-G-C21-MPB
Available stocks
Related parts for PT-39-G-C21-MPB
PT-39-G-C21-MPB Summary of contents
Page 1
... Specifically engineered for pocket-size, ultra portable front projectors, head-up projection displays • Optimized for Micro-Display diagonal sizes ranging from 0.4” to 0.55” with 4:3 aspect ratio. • Suitable for DLP™ (0.45” and 0.55” SVGA), LCoS and HTPS/ 3LCD microdisplays © ...
Page 2
... PT39 - Summary Datasheet - Revision 08 Optical and Electrical Characteristics Bin Kit Emitting Area Emitting Area Dimensions Characteristics at recommended Pulsed Drive Current I 4 Reference Duty Cycle 5 Recommended Peak Drive Current 6 Peak Luminous Flux Peak Radiometric Power Dominant Wavelength FWHM - Spectral bandwidth at 50% of Φ ...
Page 3
... PT39 - Summary Datasheet - Revision 08 Optical and Electrical Characteristics Bin Kit Characteristics at Reference Continuous Drive Current I Reference Drive Current Luminous Flux Radiometric Power Dominant Wavelength FWHM - Spectral bandwidth at 50% of Φ 7,8 Color Saturation 7,8 Chromaticity Coordinates Forward Voltage Dynamic Resistance Note 1: EP-Blue is recommended for new designs. Please see page 9 for part ordering numbers. ...
Page 4
... PT39 - Summary Datasheet - Revision 08 Absolute Maximum Ratings 1 Maximum Current Absolute Maximum Junction Temperature Storage Temperature Range Note 1: Luminus PhlatLight LEDs are designed for operation to an absolute maximum forward drive current density of 2.5A/mm2 cw, and 3A/ mm2 pulsed (f>240Hz, duty cycle < 60%). Please refer to absolute maximum rating table above for specific absolute maximum cur- rents for the products covered in this datasheet ...
Page 5
... PT39 - Summary Datasheet - Revision 08 Luminous Flux variation with Wavelength: Φ 700 600 500 400 300 200 100 0 615 620 625 630 λ (nm) d See note 1 on page 6. Luminous Flux variation with Drive Current - Φ 700 600 500 400 300 200 100 ...
Page 6
... Chart Notes Note 1: For Pulsed operation, typical RGB duty cycles used are 25%, 50% and 25% respectively (T Note 2: Yellow square indicate device operating point under recommended conditions listed in the Optical and Electrical Char- acteristics table. Note 3: Typical Spectrum at recommended peak drive current. = f(I ...
Page 7
... PT39 - Summary Datasheet - Revision 08 Thermal Resistance definition = 3 mm from core-board hs Thermistor Information The thermistor used in PhlatLight devices mounted on core-boards is from Murata Manufacturing Co. The global part number is NCP15XH103J03RC. Please see http://www.murata.com/ or http://www.murata.co.jp for details on calculating thermistor tempera- ture. Window Window ...
Page 8
... TOP OF METAL SUBSTRATE TO EMITTING AREA • Red, Green and Blue PT39 PhlatLight LEDs are individually assembled into a Type CX, Common Anode Copper Core- Board with a footprint of 26 mm. • Dimension above for information only. For detailed dimensions, always refer to the latest revision of the DWG- 001263 package outline • ...
Page 9
... PT39 - Summary Datasheet - Revision 08 Ordering Information Customer Die Part Number Configuration PT-39-R-C21-MPB PT-39-G-C21-MPB Standard PT-39-B-C21-MPB PT-39-B-C21-EPA Note 1: Not recommended for new designs Note 2: Bin Kit EPA is recommended for new designs. The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein ...