SFH 225 FA OSRAM Opto Semiconductors Inc, SFH 225 FA Datasheet - Page 6
![Photodiodes PHOTODIODE](/photos/15/81/158169/00025294_0_sml.jpg)
SFH 225 FA
Manufacturer Part Number
SFH 225 FA
Description
Photodiodes PHOTODIODE
Manufacturer
OSRAM Opto Semiconductors Inc
Type
Chipr
Datasheet
1.SFH_225_FA.pdf
(6 pages)
Specifications of SFH 225 FA
Photodiode Material
Silicon
Peak Wavelength
900 nm
Half Intensity Angle Degrees
60 deg
Maximum Reverse Voltage
20 V
Maximum Power Dissipation
150 mW
Maximum Light Current
34 uA
Maximum Dark Current
30 nA
Maximum Rise Time
20 ns
Maximum Fall Time
20 ns
Package / Case
TO-92
Maximum Operating Temperature
+ 100 C
Minimum Operating Temperature
- 40 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
Q62702P1051
SFH 225 FA
Published by
OSRAM Opto Semiconductors GmbH
Wernerwerkstrasse 2, D-93049 Regensburg
www.osram-os.com
© All Rights Reserved.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
1
2
components
, may only be used in life-support devices or systems
with the express written approval of OSRAM OS.
1
A critical component is a component usedin a life-support device or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2
Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain
and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2007-04-02
6