SFH 9315-Z OSRAM Opto Semiconductors Inc, SFH 9315-Z Datasheet - Page 8

• Manufacturer Part Number: SFH 9315-Z
• Description: Photointerruptors SLOTTED INTERRUPTER
• Manufacturer: OSRAM Opto Semiconductors Inc

Specifications of SFH 9315-Z

• Maximum Fall Time: 17 us
• Maximum Operating Temperature: + 85 C
• Maximum Rise Time: 13 us
• Minimum Operating Temperature: - 40 C
• Wavelength: 950 nm
• Sensing Method: Slotted Intterrupter
• Output Collector Emitter Voltage (detector): 15 V
• Maximum Reverse Voltage (emitter): 5 V
• Maximum Collector Current (detector): 15 mA
• Slot Width: 5.2 mm
• Output Device: Phototransistor
• Power Dissipation: 65 mW
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q65110A1216

SFH 9315
Published by OSRAM Opto Semiconductors GmbH
Wernerwerkstrasse 2, D-93049 Regensburg
www.osram-os.com
© All Rights Reserved.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
1
2
components
, may only be used in life-support devices or systems
with the express written approval of OSRAM OS.
1
A critical component is a component usedin a life-support device or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2
Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain
and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2007-04-03
8