V2-EVAL (UK) FTDI, V2-EVAL (UK) Datasheet - Page 29

• Manufacturer Part Number: V2-EVAL (UK)
• Description: Interface Modules & Development Tools USB Vinculum-II Eval Kit UK Power Supply
• Manufacturer: FTDI

Specifications of V2-EVAL (UK)

• Interface Type: USB, Serial, UART, FIFO, SPI
• Data Bus Width: Serial, 8 bit
• Operating Supply Voltage: 4.75 V to 5.25 V
• Product: Interface Modules
• For Use With/related Products: VNC2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.9
JP1 and JP2 jumpers are available for use as jumper select inputs to the VNC2.
Jumper
JP1
JP2
Notes:
Table 5.13
(38) The use of these pins for GPIO is set by the IOMUX on the VNC2 device. The pins are shared by
Figure 5.14
other connectors on the board. Care should be taken to ensure that pins are not driven from
other headers on the board.
48-PIN
46 / IOBUS25
47 / IOBUS26
GPIO Jumpers JP1, JP2
GPIO jumpers JP1, JP2.
VNC2 Pin Number / Signal Name
GPIO Jumper pins, JP1, JP2.
Copyright © 2010 Future Technology Devices International Limited
64-PIN
29 / IOBUS18
-
V2-EVAL Vinculum II Evaluation Board Datasheet Version 1.0
VNC2 Signal Name
Comments
Signal also connected to LED5
Document Reference No.: FT_000247
Clearance No.: FTDI#148
28