RK-WI.232FHSS-25-FCC-R Radiotronix, RK-WI.232FHSS-25-FCC-R Datasheet - Page 4

• Manufacturer Part Number: RK-WI.232FHSS-25-FCC-R
• Description: RF Modules & Development Tools Rapid Development Kit FCC certified
• Manufacturer: Radiotronix

Specifications of RK-WI.232FHSS-25-FCC-R

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: RK-WI232FHSS-25-FCC-R

RK-Wi.232FHSS-25/250 Rapid Development Kit
1 Description
The RK-Wi.232FHSS-250 is a rapid-development/evaluation kit for the Wi.232FHSS-250 data
transceiver.
Included in the kit is:
2 RApid Development Kit Setup
© 2002-2005 Radiotronix Inc, all rights reserved
•
•
•
•
•
•
•
•
•
* An EVM is a Wi.232FHSS module pre-mounted on a small PCB with onboard antenna connector
and power supply regulator.
•
•
•
•
•
•
•
•
•
•
•
1-Rapid Development Case.
1-Rapid Development Utility and Documentation CD.
2-Wi.232FHSS-250 Rapid Development Boards.
2-Wi.232FHSS-250 -or- 2-Wi.232FHSS-25 Transceiver Modules mounted on EVM’s*.
2-900 MHz antennas.
2-RS-232 cables.
2-USB cables.
6-AAA batteries.
Startup Guide.
Insert the AAA batteries into the evaluation PCB, observing the correct polarity.
Insert an EVM into one of the evaluation boards, observing the correct orientation (see later in
this document). The correct orientation of the EVM is with the antenna connector closest to the
edge of the evaluation board. Make sure the module is seated fully and correctly.
Insert the other EVM into the other evaluation board, also observing the correct polarity.
Connect antennas to EVM’s.
Connect evaluation boards to computers. If using USB communications, populate USB jumpers
and remove RS-232 jumpers. If using RS-232 communications, populate RS-232 jumpers and
remove USB jumpers.
Install the RK-Wi.232FHSS Windows software. If already installed, skip this step.
Select the type of module provided in this kit (Wi.232FHSS-25 LP or Wi.232FHSS-250)
Select COM port and 2400 baud operation. Navigate to the “Wireless Chat” tab.
Power-On both evaluation boards, verifying that the version/copyright information is echoed to the
screen from both modules.
Chat back and forth between evaluation boards, verifying that serial and RF communications are
successful.
IMPORTANT NOTE FOR HYPERTERMINAL
- 3 -
USERS: See section 4.1
User’s Manual (Preliminary)
12/11/2006