II-EVB-363MO-US-110 Connect One, II-EVB-363MO-US-110 Datasheet - Page 8

• Manufacturer Part Number: II-EVB-363MO-US-110
• Description: WiFi / 802.11 Modules & Development Tools EvalBrd NanoSoktWiFi USA 110V Pwr Supply
• Manufacturer: Connect One

Specifications of II-EVB-363MO-US-110

• Interface Type: RS-232, USB
• Security: FTS, HTTPS, WEP, WPA, WPA2
• Operating Voltage: 3.3 V
• Antenna: Chip
• Operating Temperature Range: - 20 C to + 75 C
• For Use With/related Products: CO2144
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Connect One
1 Introduction
1.1
Nano Socket iWiFi
Wireless LAN device-server module that also
acts as a bridge to connect serial devices to
802.11b/g Wireless LANs. It includes the
iChip
Controller
chipset and an on-board antenna. It is
packaged in a RoHS-compliant ultra-slim form
factor and uses an industry standard pin-out.
Nano Socket iWiFi offers much more than
many other device servers on the market. It
acts as a security gap between the application
and the network; supports up to 10
simultaneous TCP/UDP sockets; two listening
sockets; a web server with two websites;
SMTP and POP3 clients; MIME attachments;
FTP and TELNET clients, and SerialNET
mode for serial-to-IP bridging.
Nano Socket iWiFi supports the SSL3/TLS1
protocol for secure sockets, HTTPS and
FTPS, WEP, WPA and WPA2 WiFi
encryption.
Nano Socket iWiFi minimizes the need to
redesign the host device hardware. It easily
inserts into headers on the host PCB and
includes an on-board antenna. Minimal or no
software configuration is needed for Nano
Socket iWiFi to access the Wireless LAN.
Connect One’s high-level AT+i
eliminates the need to add WiFi drivers,
security and networking protocols and tasks
to the host application. The AT+i SerialNET
operating mode offers a true plug-and-play
mode that eliminates any changes to the host
application.
Nano Socket iWiFi firmware – the IP stack
and Internet configuration parameters – are
stored in an on-board flash memory. The
module is power-efficient: the core operates
at 1.2V, while I/Os operate at 3.3V. Power
Save mode further reduces power
consumption.
Nano Socket iWiFi Data Sheet
™
CO2144 IP Communication
General Description
™
chip, Marvell 88W8686 WiFi
™
is a secure serial-to-
™
API
™
The II-EVB-363MO evaluation board
provides an easy environment for testing the
Nano Socket iWiFi prior to designing it into
your product.
1.2
1.3
Size: 45.21 x 24.88 x 8.6 mm
Core CPU: Connect One CO2144,
running at 48MHz
Operating Voltage: +3.3V+/-10%
Operating Humidity: 90% maximum
(non-condensing)
Operating Temperature Range:
-20° to 75°C (-4° to 167°F)
Power Consumption:
Transmit – 250mA @16dbm
235mA @12dbm (typical)
Receive – 190mA (typical)
Power Save mode – 8mA
On-Board 2dBi Antenna
Connector: 2 x 15 Header 2mm pitch
Host Interface: TTL Serial, SPI and
USB device.
RMII Interface
RoHS-compliant; lead-free
Host Data Rate: up to 3Mbps in serial
mode, 12Mbps in LAN-WiFi mode
Serial Data Format (AT+i mode):
Asynchronous character; binary; 8 data
bits; no parity; 1, 1.5 or 2 stop bits
SerialNET mode: Asynchronous
character; binary; 7 or 8 data bits; odd,
even, or no parity; 1,1.5 or 2 stop bits
Flow Control: Hardware (-RTS, -CTS)
and software flow control.
Hardware Description
Performance
Specifications
Introduction
1-1