II-EVB-363MW-EU0220 Connect One, II-EVB-363MW-EU0220 Datasheet - Page 7

• Manufacturer Part Number: II-EVB-363MW-EU0220
• Description: WiFi / 802.11 Modules & Development Tools Evalbrd Nano WiReach EU 220V Extrnl Ant
• Manufacturer: Connect One

Specifications of II-EVB-363MW-EU0220

• Wireless Frequency: 2.4 GHz
• Security: HTTPS, FTPS, WEP, WPA, WPA2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Connect One
1 Introduction
1.1
Nano WiReach
Wireless LAN device server module that also
acts as a bridge to connect serial devices to
802.11b/g Wireless LANs. It includes the
iChip
Controller
chipset. It is packaged in RoHS-compliant
ultra-slim form factor and uses an industry
standard pin-out.
Nano WiReach offers much more than many
other device servers on the market. It acts as
a security gap between the application and
the network; supports up to 10 simultaneous
TCP/UDP sockets; two listening sockets; a
web server with two websites; SMTP and
POP3 clients; MIME attachments; FTP and
TELNET clients, and SerialNET
serial-to-IP bridging.
Nano WiReach supports the SSL3/TLS1
protocol for secure sockets, HTTPS and
FTPS, WEP, WPA and WPA2 WiFi
encryption.
Nano WiReach minimizes the need to
redesign the host device hardware. It easily
inserts into headers on the host PCB and
connects to an external antenna. Minimal or
no software configuration is needed for Nano
WiReach to access the Wireless LAN.
Connect One’s high-level AT+i
eliminates the need to add WiFi drivers,
security and networking protocols and tasks
to the host application. The AT+i SerialNET
operating mode offers a true plug-and-play
mode that eliminates any changes to the host
application.
Nano WiReach firmware – the IP stack and
Internet configuration parameters – are
stored in an external flash memory. The
module is power-efficient: the core operates
at 1.2V, while I/Os operate at 3.3V. Power
Save mode further reduces power
consumption.
Nano WiReach Data Sheet
™
CO2144 IP Communication
General Description
™
chip and Marvell 88W8686 WiFi
™
is a secure serial-to-
™
™
API
mode for
The II-EVB-363NW evaluation board
provides an easy environment for testing the
Nano WiReach prior to designing it into your
product.
1.2











1.3




Size: 33.76 x 18.0 x 5.5 mm
Core CPU: 32-bit RISC ARM7TDMI, low-
leakage, 0.13 micron, running at 48MHz
Operating Voltage: +3.3V+/-10%
Operating Humidity: 90% maximum
(non-condensing)
Operating Temperature Range:
-20° to 75°C (-4° to 167°F)
Power Consumption:
Transmit – 250mA @16dbm
235mA @12dbm (typical)
Receive – 190mA (typical)
Power Save mode – 8mA
RF Connector: U.FL of Hirose
Connector: Low profile 30 pin
Host Interface: TTL Serial, SPI and
USB device.
RMII Interface
RoHS-compliant; lead-free
Host Data Rate: up to 3Mbps in serial
mode
Serial Data Format (AT+i mode):
Asynchronous character; binary; 8 data
bits; no parity; 1 stop bit
SerialNET mode: Asynchronous
character; binary; 7 or 8 data bits; odd,
even, or no parity; 1 stop bit
Flow Control: Hardware (-RTS, -CTS)
and software flow control.
Hardware Description
Performance
Specifications
Introduction
1-1