II-EVB-362MW-US-110 Connect One, II-EVB-362MW-US-110 Datasheet - Page 4

• Manufacturer Part Number: II-EVB-362MW-US-110
• Description: WiFi / 802.11 Modules & Development Tools EVB FOR MINISOCKET iWiFi MOD USA 110V
• Manufacturer: Connect One

Specifications of II-EVB-362MW-US-110

• Interface Type: RS-232
• Security: WPA, TKIP, AES-CCM, WEP 64,128 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1.
This manual is intended to familiarize prospective customers with Connect One’s
Instant Internet Evaluation Board II-EVB-362MW. The II-EVB-362MW is an
evaluation platform for the Mini Socket iWiFi™ Internet Controller. Mini Socket
iWiFi is a secure serial-to-Wireless LAN device server module that also acts as a
bridge to connect serial devices to 802.11b/g wireless LANs. Mini Socket iWiFi fits
into a compact form factor and utilizes Connect One’s iChip CO2128 IP
Communication Controller
protocol commands developed by Connect One to manage Internet connectivity
through a wireless LAN connection.
Mini Socket iWiFi enables sending and receiving textual and binary data, MIME-
encoded email messages; downloading HTML pages or files from a Web server, or
items from within a page; Web serving, as well as managing TCP or UDP socket
communications (with or without SSL3) over the Internet. It also includes an FTP
client and a TELNET client.
Mini Socket iWiFi supports numerous security protocols like SSL3/TLS1, 64/128-bit
WEP encryption, AES-CCM and TKIP encryption, WPA (including AES) and
WPA2.
2.
Take the II-EVB-362MW out of its box. Included in the box are:
3.
3.1.
To test the wireless LAN connection, you need to configure the Mini Socket iWiFi to
connect to an Access Point:
II-EVB-362MW User’s Manual
 The II-EVB-362MW motherboard including Mini Socket iWiFi
 A serial cable with two DB-9 connectors
 Antenna
 Power supply adaptor (110V/220V)
1. Connect one end of the RS232 cable to the serial port on the II-EVB-362MW
2. Connect the II-EVB-362MW to the power supply.
1. Make sure the Access Point is connected and configured properly.
2. Invoke the iChip Config Utility on your PC.
3. In the main window of the utility, click the Dumb Terminal icon.
4. In the Dumb Terminal window, enter the AT+i command to verify that the
5. Enter the AT+iRP11 command to obtain a report of all the Access Points
Introduction
Unpacking
Connections
(J1) and connect the other DB-9 connector to the COM1 or COM2 serial port
on your PC, or to the serial port of your embedded device.
Testing the Mini Socket iWiFi Wireless LAN Connection
iChip is communicating with your PC. You should receive an I/OK in
response.
available in your area.
™
and the AT+i
™
command set, a powerful set of Internet
4