S29GL256P11TFI010 Spansion Inc., S29GL256P11TFI010 Datasheet - Page 31

• Manufacturer Part Number: S29GL256P11TFI010
• Description: Flash 3V 256Mb Mirrorbit highest address110ns
• Manufacturer: Spansion Inc.

Specifications of S29GL256P11TFI010

• Memory Type: NOR
• Memory Size: 256 Mbit
• Access Time: 110 ns
• Data Bus Width: 8 bit, 16 bit
• Architecture: Uniform
• Interface Type: Page-mode
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Maximum Operating Current: 50 mA
• Mounting Style: SMD/SMT
• Operating Temperature: + 85 C
• Package / Case: TSOP-56
• Memory Configuration: 128K X 16
• Ic Interface Type: Parallel
• Supply Voltage Range: 2.7V To 3.6V
• Memory Case Style: TSOP
• No. Of Pins: 56
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Notes
1. See
2. See
November 20, 2009 S29GL-P_00_A12
No
Table 12.1 on page 69
DQ3: Sector Erase Timeout State Indicator on page 39
PASS. Device returns
to reading array.
DQ3 = 1?
Yes
Poll DQ3.
Yes
No
for erase command sequence.
Write Sector Erase Cycles:
Sector Address, Data 30h
Address 555h, Data AAh
Address 2AAh, Data 55h
Address 555h, Data AAh
Address 555h, Data 80h
Address 2AAh, Data 55h
Perform Write Operation
Write Unlock Cycles:
Sector Addresses
(see
Write Additional
Status Algorithm
Additional
DQ5 = 1?
Sectors?
Figure
Yes
Done?
Select
Yes
No
Yes
7.4)
D a t a
FAIL. Write reset command
Last Sector
Selected?
to return to reading array.
S29GL-P MirrorBit
No
for information on the sector erase timeout.
No
S h e e t
Figure 7.3 Sector Erase Operation
®
Flash Family
• Each additional cycle must be written within t
• The host system may monitor DQ3 or wait t
• No limit on number of sectors
• Commands other than Erase Suspend or selecting additional
Unlock Cycle 1
Unlock Cycle 2
Command Cycle 1
Command Cycle 2
Command Cycle 3
Specify first sector for erasure
Status may be obtained by reading DQ7, DQ6 and/or DQ2.
Error condition (Exceeded Timing Limits)
acceptance of erase commands
sectors for erasure during timeout reset device to reading array
data
SEA
SEA
to ensure
timeout
31