S29GL512P11TFI010 Spansion Inc., S29GL512P11TFI010 Datasheet - Page 41

• Manufacturer Part Number: S29GL512P11TFI010
• Description: Flash 3V 512Mb Mirrorbit highest address110ns
• Manufacturer: Spansion Inc.

Specifications of S29GL512P11TFI010

• Memory Type: NOR
• Memory Size: 512 Mbit
• Access Time: 110 ns
• Data Bus Width: 8 bit, 16 bit
• Architecture: Uniform
• Interface Type: Page-mode
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Maximum Operating Current: 50 mA
• Mounting Style: SMD/SMT
• Operating Temperature: + 85 C
• Package / Case: TSOP-56
• Memory Configuration: 128K X 16
• Ic Interface Type: Parallel
• Supply Voltage Range: 2.7V To 3.6V
• Memory Case Style: TSOP
• No. Of Pins: 56
• Cell Type: NOR
• Density: 512Mb
• Access Time (max): 110ns
• Boot Type: Not Required
• Address Bus: 26/25Bit
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: TSOP
• Sync/async: Asynchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 8/16Bit
• Number Of Words: 64M/32M
• Supply Current: 110mA
• Mounting: Surface Mount
• Pin Count: 56
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

November 21, 2006 S29GL-P_00_A3
8. There are no means for individually erasing a specific PPB and no specific sector address is
9. Exit command must be issued after the execution which resets the device to read mode and re-
10. The programming state of the PPB for a given sector can be verified by writing a PPB Status Read
D a t a
required for this operation.
enables reads and writes for Sector 0.
Command to the device as described by the flow chart shown in
S h e e t
No
Figure 8.2 PPB Program/Erase Algorithm
( A d v a n c e
S29GL-P MirrorBit
Program PPB Bit.
Read Byte Twice
Read Byte Twice
Command Set.
Issue Reset
Addr = SA0
Enter PPB
Addr = SA0
Command
Addr = BA
Addr = SA
DQ5 = 1?
Toggle?
Toggle?
DQ6 =
DQ6 =
FAIL
Yes
Yes
Yes
Command Set
I n f o r m a t i o n )
No
No
Exit PPB
TM
Flash Family
No
Wait 500 µs
Read Byte.
'0' (Pgm.)?
Addr = SA
'1' (Erase)
DQ0 =
PASS
Yes
Figure
8.2.
39