ASDXRRX001PDAA5 Honeywell, ASDXRRX001PDAA5 Datasheet - Page 3

Board Mount Pressure Sensors Differential 0 psi to 1.0 psi

ASDXRRX001PDAA5

Manufacturer Part Number
ASDXRRX001PDAA5
Description
Board Mount Pressure Sensors Differential 0 psi to 1.0 psi
Manufacturer
Honeywell

Specifications of ASDXRRX001PDAA5

Operating Pressure
0 psi to 5 psi
Pressure Type
Differential
Accuracy
+/- 2 %
Output Type
Digital
Mounting Style
DIP
Maximum Operating Temperature
+ 105 C
Minimum Operating Temperature
- 20 C
Operating Supply Voltage
5 V
Supply Voltage (min)
4.75 V
Supply Voltage (max)
5.25 V
Supply Current
2.5 mA
Package / Case
DIP-8
Body Style
Rectangular
Function
Pressure
Mounting Type
PCB
Primary Type
Pressure
Range, Measurement
1 PSID
Sensing Mode
Differential
Technology
Piezoelectric
Voltage, Supply
3.3-5 VDC
Wide Compensated Temperature Range
0°C to+ 85°C (+32°F to +185°F)
Pressure Ranges
From 0 psi to 1 psi through 0 psi to 30 psi
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Figure 1. Nomenclature and Order Guide
Notes:
12.
13.
14.
15.
16.
17.
Other package combinations are possible, please contact Honeywell Customer Service.
The transfer function limits define the output of the sensor at a given pressure input. By specifying P
complete transfer curve for the sensor) is defined.
The output type defines which communication protocol the sensor uses to communicate. Available protocols are I
slave). This communication protocol is not field selectable, and must be defined when ordering the sensor.
Custom pressure ranges are available, please contact Honeywell Customer Service.
The pressure units (psi, mbar, bar, kPa) define the units used during calibration and in the application.
See Table 5 for an explanation of sensor types.
See Figure 2 for a graphical representation of each calibration.
For the 14 bit digital output, Table 6 provides the output of the sensor at significant percentages. These outputs are valid at the rated input voltage of the
sensor.
Compensated Digital Output
min
and P
max
the output at P
2
C or half duplex SPI (sensor acts only as a
Honeywell Sensing and Control
min
and the output at P
max
(the
3

Related parts for ASDXRRX001PDAA5