JBX2MPN Souriau Connection Technology, JBX2MPN Datasheet - Page 17
![CONN BOOT PROTECTIVE SIZE 2 BLK](/photos/16/72/167236/jbx_sml.jpg)
JBX2MPN
Manufacturer Part Number
JBX2MPN
Description
CONN BOOT PROTECTIVE SIZE 2 BLK
Manufacturer
Souriau Connection Technology
Series
JBXr
Specifications of JBX2MPN
Accessory Type
Boot
Shell Size - Insert
2
Color
Black
Operating Temp Range
-40C to 80C
Product Length (mm)
30mm
Product Type
Accessories
Shell Size
2
Contact Plating
Chrome over Nickel
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With/related Products
JBX Series
Features
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
SOU1620
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
JBX2MPN
Manufacturer:
Souriau Connection Technology
Quantity:
135
Wiring and assembly
instructions :
90° ELBOW PLUG
• Connector preparation
• Contacts wiring : crimp contacts
• Contacts wiring : solder contacts
• Connector assembly : 90 degree plug
Fixed solder contacts 0.5 mm and 0.7 mm
1 - Insert wire into solder cup and solder.
Braid
Milled flats A
JBX Series
2 - Insert contact into the insulator until the clip is fully seated and cannot be removed.
18
1 - Select the proper crimping tool and locator. (see page 48)
2 - Adjust the crimping tool based on wire size “AWG”. (See wire size and
3 - Crimp the contacts
1 - Select the proper collet (see page 19).
2 - Slide the protective boot
3 - If a shielded cable is used, fold the braid back over the collet
4 - Align the keys in the elbow outlet
5 - Apply thread lock to the backnut
6 - Install the back nut
Removable solder contacts from 0.9 mm to 2 mm
crimp tool settings on the back of the locator)
clip is fully seated and cannot be removed.
outlet
1 - Insert wire into solder cup and solder.
over the cable. Strip end of cable (see pg. 17).
1 - Position the ring
2 - Align the key on the insulator
3 - Insert the insulator sub-assembly into the connector
4 - Apply thread lock to retaining nut
5 - Tighten the retaining nut
on the spacer
spacer.
housing
are facing the retaining nut
torque on page 19.
then insert the contact into the insulator until the
and tighten until it bottoms.
, the backnut
insuring the flats on the elbow outlet
and insert the insulator into the
.
over the insulator.
with the key slot in the collet.
, the collet
to the recommended
.
with the key way
.
and the elbow
.