A10204-U1 Antenova, A10204-U1 Datasheet - Page 8

• Manufacturer Part Number: A10204-U1
• Description: Antennas Reference Board for Brevis GPS Antenna
• Manufacturer: Antenova

Specifications of A10204-U1

• Dimensions: 70 mm L x 30 mm W
• Frequency Range: 1575 MHz
• Vswr: 1.4:1
• Technology Type: Reference Board for Internal GPS SMD Chip Antenna
• Frequency: 1575 MHz
• Bandwidth: 50 MHz
• Gain: 0 dBi
• Termination Style: SMA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10-3 Antenna placement
10-4 Reference board
Integrated Antenna and RF Solutions
In addition to the matching circuit, a separate DC blocking capacitor will also be required
between the radio and the antenna matching circuit.
Note: The component values for the matching circuit will vary depending on the size of
the PCB and surrounding components. The impedance of the antenna should be measured
before selecting suitable matching components. Antenova offers this service on request.
Contact
Antenna placement locations and orientations are critical for achieving optimal system
performance. Antenova strongly recommends placing the antenna near the edge of the board.
Maximum antenna performance is achieved by placing the antenna towards one of the corners
of the PCB, with the feed point of the antenna as close to the corner of the PCB as possible.
Antenova offers a full range of development support to ensure efficient implementation of the
antenna into the specific design. To overcome RF design issues, matching circuits,
transmission
([e-mail]) for design and placement recommendations.
The reference board has been designed for evaluation purposes of the Brevis A10204 antenna
and it includes a SMA female connector
[e-mail]
lines,
layout
Contact
for further information.
[e-mail]
and
Dimensions in mm
other
components,
for further details
please
Brevis GPS SMD Antenna
contact
Product Specification 09MD-0019-2-PS
Part No. A10204
Antenova
8