A6150-U1 Antenova, A6150-U1 Datasheet - Page 7

• Manufacturer Part Number: A6150-U1
• Description: Antennas Reference Board for Impexa 2.4 GHz Left
• Manufacturer: Antenova

Specifications of A6150-U1

• Dimensions: 45 mm L x 15.5 mm W
• Frequency Range: 2.4 GHz to 2.5 GHz
• Vswr: 1.9:1
• Technology Type: Reference Board for Internal SMD Chip Antenna
• Frequency: 2.4 GHz
• Gain: 1 dBi
• Termination Style: SMA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Impexa 2.4 GHz SMD Antenna
Part No. A6150 / A6250
In addition to the matching circuit, a separate DC blocking capacitor will also be required
between the radio and the antenna matching circuit.
Note: The component values for the matching circuit will vary depending on the size of
the PCB and surrounding components. The impedance of the antenna should be measured
before selecting suitable matching components. Antenova offers this service on request.
Contact
[e-mail]
for further information.
10-3 Antenna placement
Antenova strongly recommends placing the antenna near the edge of the board. Maximum
antenna performance is achieved by placing the antenna towards one of the corners of the
PCB.
Additional ground and components near the antenna should be at a distance of at least 2 mm.
Where possible the antenna should be clear of ground from both sides, although the antenna
can work well with a minimum clearance of D ≥ 2 mm as shown in the drawing above.
Integrated Antenna and RF Solutions
7
Product Specification AE040034-I