B5812-U2 Antenova, B5812-U2 Datasheet - Page 7
![Antennas Reference Board for Flavus GSM Antenna](/photos/16/26/162604/b5812u1_sml.jpg)
B5812-U2
Manufacturer Part Number
B5812-U2
Description
Antennas Reference Board for Flavus GSM Antenna
Manufacturer
Antenova
Datasheet
1.B5812-U2.pdf
(13 pages)
Specifications of B5812-U2
Frequency Range
880 MHz to 960MHz, 1710 MHz to 1990 MHz
Vswr
5.9:1
Technology Type
Reference Board for Internal Snap In Antenna
Frequency
880 MHz to 960 MHz, 1710 MHz to 1990 MHz
Gain
1.4 dBi
Termination Style
SMA
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
9 Antenna footprint
*PCB thickness dependent on Flavus model used.
10 Electrical interface
11.85
+/-0.1
Feed
F1
10-1 Transmission lines
Integrated Antenna and RF Solutions
The antenna should be connected using an RF transmission line.
•
•
•
Once the material for the PCB has been chosen (PCB thickness and dielectric constant), a co-
planar transmission line can easily be designed using any of the commercial software
packages for transmission line design. For the chosen PCB thickness, copper thickness and
substrate dielectric constant, the program will calculate the appropriate transmission line width
and gaps on either side of the track so the characteristic impedance of the co-planar
transmission line is 50 Ω.
All transmission lines should be designed to have a characteristic impedance of 50 Ω
The length of the transmission lines should be kept to a minimum
Any other parts of the RF system like transceivers, power amplifiers, etc, should also be
designed to have an impedance of 50 Ω
2.8 +/-0.1
CAD files of the antenna footprint are available from Antenova on request. Please contact
Feed
F2
2 +/-0.05
Feed
F3
+/-0.05
Feed
2.25
F4
5 +/-0.05
info@antenova.com
Feed
F5
Flavus GSM (Part No: B5812-XX)
5.6 +/-0.1
Snap-In
S1
4.5+/-0.1
Position
P1
for further details.
Position
+/- 0.1
11.5
P2
0.3 +/-0.1 5.9 +/-0.1
Position
P3
Flavus GSM Snap-In Antenna
Position
P4
Diameter
3.05 +/-
D1
0.1
Part No. B5812-xx
Product Specification AE020033-H
Diameter
1.75 +/-
D2
0.1
0.8, 1.0,
PCB
1.6
T*
7