B32656S0155K562 EPCOS Inc, B32656S0155K562 Datasheet - Page 26
![Snubber Film Capacitors 1.5uF 1000volts 10% ESR 5.0mOhms Term=T2](/photos/16/32/163224/snubberfilmmkpb32656_sml.jpg)
B32656S0155K562
Manufacturer Part Number
B32656S0155K562
Description
Snubber Film Capacitors 1.5uF 1000volts 10% ESR 5.0mOhms Term=T2
Manufacturer
EPCOS Inc
Series
B32656Sr
Datasheet
1.B32656S8225K561.pdf
(31 pages)
Specifications of B32656S0155K562
Voltage Rating
1 KVolts
Termination Style
Radial
Dimensions
30 mm W x 42 mm L x 45 mm H
Esr
5 mOhms
Ripple Current
15 Amps
Operating Temperature Range
- 55 C to + 85 C
Product
Snubber Film Capacitors
Capacitance
1.5 uF
Tolerance
10 %
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Cautions and warnings
The table below summarizes the safety instructions that must always be observed. A detailed de-
scription can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Storage conditions
Flammability
Resistance to
vibration
Please read Cautions and warnings and
Important notes at the end of this document.
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
B32656S
Snubber (wound)
Safety information
Make sure that capacitors are stored within the
specified range of time, temperature and humidity
conditions.
Avoid external energy, such as fire or electricity
(passive flammability), avoid overload of the
capacitors (active flammability) and consider the
flammability of materials.
Do not exceed the tested ability to withstand
vibration. The capacitors are tested to
IEC 60068-2-6.
EPCOS offers film capacitors specially designed
for operation under more severe vibration regimes
such as those found in automotive applications.
Consult our catalog "Film Capacitors for
Automotive Electronics".
Page 26 of 31
Reference chapter
"General technical
information"
4.5
"Storage conditions"
5.3
"Flammability"
5.2
"Resistance to vibration"