HEDS-8910#014 Avago Technologies US Inc., HEDS-8910#014 Datasheet - Page 8
![Encoders Align Tool for HEDX- 5XXX 5mm](/photos/16/35/163570/heds-5500_sml.jpg)
HEDS-8910#014
Manufacturer Part Number
HEDS-8910#014
Description
Encoders Align Tool for HEDX- 5XXX 5mm
Manufacturer
Avago Technologies US Inc.
Datasheet
1.HEDS-8907-001.pdf
(12 pages)
Specifications of HEDS-8910#014
Product
Tools & Accessories
Size / Dimension
5 mm
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Mounting Considerations
The HEDS-5540 and 5640 three channel encoders and the
HEDM Series high resolution encoders must be aligned
using the aligning pins as specified in Figure 3, or using
the HEDS-8910 Alignment Tool as shown in Encoder
Mounting and Assembly.
The use of aligning pins or alignment tool is recommend-
ed but not required to mount the HEDS-5500 and 5600.
If these two channel encoders are attached to a motor
with the screw sizes and mounting tolerances specified
in the mechanical characteristics section without any
Figure 2. Mounting Holes.
Figure 4. Mounting with External Ears.
8
Figure 3. Optional Mounting Aids.
additional mounting bosses, the encoder output errors
will be within the maximums specified in the encoding
characteristics section. The HEDS-5500 and 5540 can be
mounted to a motor using either the two screw or three
screw mounting option as shown in Figure 2. The optional
aligning pins shown in Figure 3 can be used with either
mounting option. The HEDS-5600, 5640, and HEDM-5600
have external mounting ears which may be used for
mounting to larger motor base plates. Figure 4 shows the
necessary mounting holes with optional aligning pins and
motor boss.