CSBLA455KJ58-B0 Murata, CSBLA455KJ58-B0 Datasheet - Page 46
![Resonators 455kHz 0.5%](/photos/16/38/163881/csb_sml.jpg)
CSBLA455KJ58-B0
Manufacturer Part Number
CSBLA455KJ58-B0
Description
Resonators 455kHz 0.5%
Manufacturer
Murata
Series
CSBLAr
Datasheet
1.CSTCC6M00G56-R0.pdf
(55 pages)
Specifications of CSBLA455KJ58-B0
Tolerance
0.5 %
Termination Style
SMD/SMT
Operating Temperature Range
- 20 C to + 80 C
Dimensions
3.5 mm W x 7 mm L x 9 mm H
Frequency
455 KHz
Frequency Tolerance
± 0.5%
Oscillator Mounting
Through Hole
No. Of Pins
2
Features
Piezoelectric Ceramic
Rohs Compliant
Yes
Resonator Case
Radial Leaded
Resonant Impedance
30ohm
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
7
!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
1. Product Storage Condition
2. Expiration Date on Storage
3. Notice on Product Storage
The component may be damaged if excessive mechanical
stress is applied.
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
44
CSBFB_J
Notice for General Usage -kHz Chip Type-
(1) Please do not store the products in a chemical
Please store the products in a room where the
temperature/humidity is stable, and avoid such
places where there are large temperature changes.
Please store the products under the following
conditions:
Expiration date (Shelf life) of the products is six
months after delivery under the conditions of a
sealed and unopened package. Please use the products
within six months after delivery. If you store the
Storage and Operating Conditions
products for a long time (more than six months),
use carefully because the products may be degraded
in solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.
Rating
Handling
Temperature: -10 to + 40 degrees C
Humidity: 15 to 85% R.H.
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to the storage in a
chemical atmosphere.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
4. Others
(2) Please do not put the products directly on the
(3) Please do not store the products in places
(4) Please use the products immediately after the
(5) Please do not drop the products to avoid cracking
Conformal coating of the component is acceptable.
However, the resin material, curing temperature, and
other process conditions should be evaluated to
confirm that stable electrical characteristics are
maintained.
Please be sure to consult with our sales representatives
or engineers whenever and prior to using the products.
floor without anything under them to avoid damp
and/or dusty places.
such as: in a damp heated place, in a place where
direct sunlight comes in, in a place applying
vibrations.
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under the poor
conditions.
of ceramic elements.
P16E.pdf
10.12.7