CSTLS7M37G53-B0 Murata, CSTLS7M37G53-B0 Datasheet - Page 40

• Manufacturer Part Number: CSTLS7M37G53-B0
• Description: Resonators 7.370MHZ .5% RESONATOR
• Manufacturer: Murata
• Series: CSTLSr

Specifications of CSTLS7M37G53-B0

• Tolerance: 0.5 %
• Termination Style: SMD/SMT
• Operating Temperature Range: - 20 C to + 80 C
• Dimensions: 3 mm W x 8 mm L x 5.5 mm H
• Frequency: 7.37 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5
!Note
The component cannot withstand washing.
Please do not apply excessive mechanical stress to the
component and lead terminals during soldering.
1. Product Storage Condition
2. Expiration Date on Storage
3. Notice on Product Storage
The component may be damaged if excessive mechanical
stress is applied.
"CERALOCK" may stop oscillating or oscillate
irregularly under improper circuit conditions.
38
Notice for General Usage -MHz Lead Type-
(1) Please do not store the products in a chemical
Please store the products in a room where the
temperature/humidity is stable, and avoid
such places where there are large temperature
changes. Please store the products under the
following conditions:
Expiration date (Shelf life) of the products is six
months after delivery under the conditions of a
sealed and unopened package. Please use the
products within six months after delivery. If you
Soldering and Mounting
Storage and Operating Conditions
store the products for a long time (more than six
months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics
for the products regularly.
Rating
Handling
Temperature: -10 to + 40 degrees C
Humidity: 15 to 85% R.H.
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to the storage in a
chemical atmosphere.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
4. Others
(2) Please do not put the products directly on the
(3) Please do not store the products in places
(4) Please use the products immediately after the
(5) Please do not drop the products to avoid cracking
Conformal coating or washing of the component is not
acceptable because it is not hermetically sealed.
Please be sure to consult with our sales representatives
or engineers whenever and prior to using the products.
floor without anything under them to avoid damp
and/or dusty places.
such as: in a damp heated place, in a place where
direct sunlight comes in, in a place applying
vibrations.
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage under the poor
conditions.
of ceramic elements.
P16E.pdf
Jul.15,2011