MCL1JJTTE3R9K KOA Speer Electronics, MCL1JJTTE3R9K Datasheet - Page 5

• Manufacturer Part Number: MCL1JJTTE3R9K
• Description: Power Inductors 3.9uH 10%
• Manufacturer: KOA Speer Electronics
• Series: MCLr

Specifications of MCL1JJTTE3R9K

• Product: Inductors
• Inductance: 3.9 uH
• Tolerance: 10 %
• Maximum Dc Current: 15 mAmps
• Maximum Dc Resistance: 1.7 Ohms
• Self Resonant Frequency: 35 MHz
• Dimensions: 0.8 mm W x 1.6 mm L x 0.8 mm H
• Shielding: Shielded
• Operating Temperature Range: - 55 C to + 125 C
• Termination Style: SMD/SMT
• Package / Case: 0603 (1608 metric)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5. Characteristics (continued)
6. Packaging Specifications
Bolivar Drive
Spec ific ation s g iven herein m ay be cha nged a t any tim e w itho ut pr ior not ice. Pleas e c onf ir m te chnic al s pec if ica tions before you order an d/or u se.
Item
Mechanical Shock
Vibration
Thermal Shock
Load Humidity
Life Test
KOA’s multi layer components are provided on tape-and-reel
for use in pick-and-place machines. The reel size is 7 inch.
P.O. Box 547
Requirement
Appearance: There shall be no physical or
mechanical damage
Inductance: Relative to initial value before test
±10%
Inductance: Relative to initial value ±10%
Appearance: There shall be no physical or
mechanical damage.
Inductance: Relative to initial value ±20%.
DCR: The DCR shall not exceed initial specified
value.
Testing of the parts will be made at 0 hours, 250
hours and 500 hours. Before testing the parts
shall be allowed to cool to room temperature for
24 hours.
Appearance: There shall be no physical or
mechanical damage
Inductance: Relative to initial value ±15%
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
Appearance: There shall be no physical or
mechanical damage
Inductance: Relative to initial value ±15%
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
Bradford, PA 16701
USA
814-362-5536
Conditions
Force: 50G
Time: 11 msec
There shall be 3 shocks in each of 6 directions
(18 shocks total).
Only endurance conditioning by sweeping shall
be made. The entire frequency range from
10-2,000 Hz and return to 10 Hz in 20 minutes
(this shall constitute one cycle).
Amplitude: 1.5mm
The test shall have a 15G peak and shall be
applied for a period of 4 hours (12 cycles)
in each of 3 mutually perpendicular directions
(a total of 36 cycles within a total of 12 hours).
Steps 1 thru 5 constitute one complete
cycle and the test shall consist of a total
of 500 cycles.
Temperature: 85°C ±2°C
Relative Humidity: 85%
Time: 1,000 hours total
Apply: 100% rated current
Temperature: 85°C ±2°C
Time: 1,000 hours total
Apply: 100% rated current
3-transfer
5-transfer
1-start
2-hold
4-hold
Fax [phone]
Step
Temperature
+105°C ±2°C 30 min ±5 min
-40°C ±2°C
-40°C ±2°C 30 min ±5 min
—
—
www.koaspeer.com
0.5 min max.
0.5 min max.
—
PAGE 5 OF 6
Time
SS-223 R9