FFA.0S.302.CLAZ LEMO, FFA.0S.302.CLAZ Datasheet - Page 35

• Manufacturer Part Number: FFA.0S.302.CLAZ
• Description: Circular Push Pull Connectors SIZE 0 2-PIN SOLDER SLDER W/O COLLET
• Manufacturer: LEMO
• Series: S Seriesr

Specifications of FFA.0S.302.CLAZ

• Product Type: Connectors
• Contact Style: Pin (Male) and Socket (Female)
• Number Of Contacts: 1 Pin, 1 Socket
• Mounting Style: Cable
• Termination Style: Solder
• Shell Plating: Chrome
• Contact Plating: Copper / Nickel / Gold
• Current Rating: 10 A
• Voltage Rating: 700 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND
INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION.
IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS
SITUATIONS.
1. SHOCK AND FIRE HAZARD
2. HANDLING
3. USE
4. TEST AND OPERATING VOLTAGES
5. CE MARKING
6. PRODUCT IMPROVEMENTS
Data subject to change
No reproduction or use without express permission of editorial or pictorial content, in any manner.
LEMO reserve the right at all times to modify and improve specifications without any notification.
www.lemo.com
Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue
(such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock.
Mated components should never be disconnected while live as this may result in an exposed electric arc and local
overheating, resulting in possible damage to components.
Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect
components should be rejected or returned to the factory for verification.
Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be used
during installation and / or assembly in order to obtain safe and reliable performance.
Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general
conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to
eliminate all risk of transmission of such voltages to any exposed metal part of the connector.
The maximum admissible operating voltage depends upon the national or international standards in force for the
application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the
catalog however these may be influenced by PC board design and / or wiring harnesses.
The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the
test duration is 1 minute.
CE marking
several European safety directives.
CE marking
connectors.
The LEMO Group reserves the right to modify and improve to our products or specifications without providing prior
notification.
means that the appliance or equipment bearing it complies with the protection requirements of one or
applies to complete products or equipment, but not to electromechanical components, such as
Product safety notice
Pdf updated, July 2010
®
© LEMO SA
®