UTS71210S Souriau Connection Technology, UTS71210S Datasheet - Page 33

• Manufacturer Part Number: UTS71210S
• Description: CONN RCPT 10X1.0 FEMALE JAM NUT
• Manufacturer: Souriau Connection Technology
• Series: Trim Trio® UTSr

Specifications of UTS71210S

• Connector Type: Receptacle for Female Contacts
• Number Of Positions: 10
• Shell Size - Insert: 12-10
• Contact Type: Crimp
• Contact Size: 20
• Mounting Type: Panel Mount
• Fastening Type: Bayonet Lock
• Orientation: Keyed
• Shell Material, Finish: Thermoplastic
• Ingress Protection: IP68/69 - Dust Tight, Waterproof
• Note: Contacts Not Provided
• Mil Type: MIL-DTL-26482 I
• Product Type: Connectors
• Contact Style: Socket (Female)
• Shell Style: Receptacle
• Shell Size: 12
• Number Of Contacts: 10
• Insert Arrangement: 10
• Mounting Style: Wire
• Termination Style: Crimp
• Current Rating: 7.5 A
• Mounting Angle: Straight
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Shell Size, Military: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: SOU1287

<<
UTS Series
The norm is dedicated to connectors with rated voltage above 50V and up to 1000V and rated currents up to 1 25A per contact. But
depending of your application connectors should be compliant with another standard. This has to be double checked with the customer.
There are lot of constructional requirements and performances specified in that standard. Most of them are illustrated in greater details
hereafter.
Provisions for earthing:
The UTS connector is intended to be used on Class II systems. Even if the purpose of our connector is not to interrupt current, we often
see a need to add a protective earth contact. Then this one shall be a “First mate, last break” style. Critically, among all of the normal
assumptions we make in designing a connector, this contact has to be considered as a live part and must be protected against electric shock
by double or reinforced insulation.
IP Code:
IP is a coding system defined by the IEC 60529 to indicate the
degrees of protection provided by an enclosure. The aim of this is to
give information regarding the accessibility of live parts against ingress
of water and other foreign bodies.
IEC 61984 ed.2.0 “Copyright © 2008 IEC Geneva, Switzerland.www.iec.ch"
IEC 60664-1 ed.2.0 “Copyright © 2007 IEC Geneva, Switzerland.www.iec.ch”
1
st
digit
0
1
2
3
4
5
6
No protection against accidental contact.
No protection against solid foreign bodies.
Protection against contacts with any large area by hand and
against large solid foreign bodies with a diameter bigger than
50 mm.
Protection against contacts with the fingers.
Protection against solid foreign bodies with a diameter bigger
than 1 2 mm.
Protection against tools, wires or similar objects with a diame-
ter bigger than 2.5 mm.
Protection against small solid bodies with a diameter bigger
than 2.5 mm.
As 3 however diameter is bigger than 1 mm.
Full protection against contacts. Protection against interior
injurious dust deposits.
Total protection against contacts. Protection against
penetration of dust.
performance IP68 / 69K…
Even in dynamic situations.
Degree of protection
UTS offers high sealing
IEC 61 984
64
In addition to the IEC 60529 we conjointly use the DIN 40050 part 9
which are dedicated to road vehicles. The main differences are:
• First digit: 5 replaced by 5K, 6 by 6K. In the DIN the tested
• Second digit: 5K and 6K has been added and are equivalent
2
nd
9K
0
1
2
3
4
5
6
7
8
digit
(international
Code letters
Protection)
No protection against water.
Drip-proof.
Protection against vertical water drips.
Drip-proof.
Protection against water drips up to a 1 5° angle.
Spray-proof.
Protection against diagonal water drips up to a 60° angle.
Splash-proof.
Protection against splashed water from all directions.
Hose-proof.
Protection against water (out of a nozzle) from all directions.
Protection against temporary flooding.
Protection against temporary immersions.
Protection against water pressure.
Pressure to be specified by supplier.
High pressure hose-proof.
Protection against high pressure water (out of a nozzle) from
all directions.
equipment is not depressurized as it is in the IEC.
respectively to 5 and 6 but with higher pressure.
9K which represents the High pressure cleaning.
Degree of protection
(foreign bodies
protection)
IP 6 8
First digit
Second digit
protection)
(water
UTS Series
Overvoltage
UTS connectors are qualified to be used on systems rated at Overvoltage category III
Per the IEC 60664-1 (formely VDE 01 10) each category is linked to the end application and where the device will be implemented:
Pollution degree
Per the IEC 60664-1 (formerly VDE 01 10) the environment affects the performance of the insulation. Particles can build a bridge between
two metal parts. As a rule dust mixed with water can be conductive and more generally speaking metal dust is conductive. Finally, the
standard defines 4 levels of pollution:
Finally, the harsher the environment is, the longer clearance and creepage distances should be. Nonetheless, according the IEC 61984,
enclosure rated at IP54 or higher can be dimensioned for a lower pollution degree. This applies to mated connectors disengaged for test
and maintenance.
Marking
The marking should give enough details to the user to know what the main characteristics are and without going deep in technical
documentation. Below examples identify the suitability of the connector:
• Category IV (primary overcurrent protection equipment):
Origin of the installation
• Category III (Any fixed installation with a permanent connection)
Fixed installation and equipment and for cases where the reliability and the availability is subject to special requirements
• Category II (Domestic applicances):
Energy consuming equipment to be supplied from the fixed installation
• Category I (Protected electronic circuit):
For connection to circuit in which measures are taken to limit transient overvoltage.
• Degree 1 (Air conditioned dry room):
No pollution or only dry, non conductive pollution occurs. The pollution has no influence.
• Degree 2 (Personal computer in a residential area):
Only non conductive pollution occurs except that occasionally a temporary conductivity caused by condensation is to be
expected.
• Degree 3 (Machine tools):
Conductive pollution occurs or dry non-conductive pollution occurs which becomes conductive due to condensation which is to
be expected.
• Degree 4 (Equipments on roof, locomotives):
Continuous conductivity occurs due to conductive dust, rain or other wet conditions.
• Example 1:
Marking of a connector with rated current 16A, rated voltage 400V, rated impulse voltage 6kV and pollution degree 3, 2 and 1 for
use in any system, preferably unearthed or delta-earthed systems:
• Example 2:
Marking of a connector with rated current 16A, rated insulation voltages line-to-earth 250V, line-to-line 400V, rated impulse
voltage 4kV and pollution degree 3, 2 and 1 for use in earthed systems:
1 6A 250V 400V 4kV 3
1 6A 400V 6kV 3
IEC 61 984
65
>>