FTR-H1AA012V Fujitsu, FTR-H1AA012V Datasheet - Page 8

• Manufacturer Part Number: FTR-H1AA012V
• Description: General Purpose / Industrial Relays Low Profile 10A 12V
• Manufacturer: Fujitsu

Specifications of FTR-H1AA012V

• Contact Form: SPST - NO
• Coil Voltage: 12 VDC
• Contact Rating: 10 A
• Contact Termination: PCB
• Mounting Style: PCB
• Power Consumption: 0.53 W
• Contact Material: Gold Plated Silver
• Coil Resistance: 27 Ohms
• Coil Type: 1 Pole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

RoHS Compliance and Lead Free Relay Information
3. Moisture Sensitivity
4. Tin Whisker
l
1. General Information
l
l
l
l
l
l
l
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
2. Recommended Lead Free Solder Profile
l
Reflow Solder condtion
Flow Solder condtion:
Pre-heating:
Soldering:
Solder by Soldering Iron:
Soldering Iron
Temperature:
Duration:
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
“LF” is marked on each outer and inner carton. (No marking on individual relays).
To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
We will ship leaded relays as long as the leaded relay inventory exists.
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
All signal and power relays also comply with RoHS. Please refer to individual data
It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
Recommended solder paste Sn-3.0Ag-0.5Cu.
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
We highly recommend that you confirm your actual solder conditions
maximum 120˚C
dip within 5 sec. at
260˚C soler bath
maximum 360˚C
maximum 3 sec.
FTR-H1 SERIES
8