RF300-5 TELEDYNE, RF300-5 Datasheet - Page 3

• Manufacturer Part Number: RF300-5
• Description: RF (Radio Frequency) Relays 5V DC-6GHz .15W
• Manufacturer: TELEDYNE
• Type: High Reliability Ultra Miniature Relayr
• Series: RF300/303r

Specifications of RF300-5

• Coil Resistance: 390 Ohms
• Frequency: 3 GHz
• Contact Form: DPDT
• Coil Voltage: 5 VDC
• Power Consumption: 450 mW
• Termination Style: PCB
• Coil Voltage Vdc Nom: 5V
• Contact Current Max: 1A
• Contact Voltage Dc Nom: 28V
• Coil Type: DC Coil
• Relay Mounting: PC Board
• External Width: 9.4mm
• Contact Configuration: DPDT
• Contact: RoHS Compliant
• Contact Arrangement: DPDT
• Dc Coil Voltage: 5 V
• Coil Current: 100 mA
• Mounting: Through Hole
• Brand/series: RF300 Series
• Capacitance: 0.4 pF (Typ.)
• Current, Rating: 1 A
• Diameter, Body: 0.370 in. (Max.)
• Diameter, Lead: 0.017 in.
• Function: Frequency (RF)
• Height: 0.275 in. (Max.)
• Length, Lead: 0.75 in.
• Mounting Type: PCB
• Number Of Pins: 10
• Package Type: TO-5
• Relay Type: Electro Mechanical
• Resistance, Coil: 50 Ohms +⁄- 20%
• Resistance, Contact: 0.15 Ohms (Max.)
• Temperature, Operating: -55 to +85 °C
• Termination: Leadwires
• Voltage, Control: 5 VDC
• Voltage, Rating: 28 VDC
• External Height: 6.99mm
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

© 2010 TELEDYNE RELAYS
SERIES RF300/RF303
TYPICAL RF REPEATABILITY PERFORMANCE (See RF Notes 1,2 and 3)
RF NOTES
1. One million cycle repeatability data is based upon 396 observations with an average repeatability ±0.033 dB and a range of
2. Repeatability of attenuation values were obtained from tests conducted in a 20 dB attenuator network with a 0 dBm input
3. Relay operates at frequencies higher than 3 GHz with reduced RF performance characteristics.
4. Curves were developed from tests performed on a 0.031" copper clad, reinforced PTFE circuit board at 20°C (ref ). The unutilized
±0.093 dB.
signal.
contacts were terminated in 50 ohms; characteristic impedance of measuring equipment is 50 ohms. The relays were
mounted fl ush to the circuit board ground plane without the relay header soldered to the ground plane.
1 Million Cycle Repeatability
±dB .060
±dB .060
0.12
0.10
.080
.040
.020
0.12
0.10
.080
.040
.020
0
0
Typical repeatability of attenuation during life (normally open contacts)
Typical repeatability of insertion loss during life (normally closed contacts)
1
1
2
2
±0.1 dB from DC to 3GHz
[phone] • www.teledynerelays.com
3
3
Number of cycles X10
Number of cycles X10
4
4
5
5
6
6
6
6
DPDT Non-Latching Electromechanical Relay
7
7
Series RF300/RF303
8
8
Signal Integrity up to 10Gbps
9
9
RF300/RF303 Page 3
10
10
RF300RF303\072010\Q3
MAX
MAX
MIN.
MIN.
X
X