SDN2.5-24-100P SOLA HEVI DUTY, SDN2.5-24-100P Datasheet - Page 2

• Manufacturer Part Number: SDN2.5-24-100P
• Description: Linear & Switching Power Supplies 60W 24-28VDC 2.5A
• Manufacturer: SOLA HEVI DUTY
• Type: Industrialr

Specifications of SDN2.5-24-100P

• Product: Switching
• Output Power Rating: 60 W
• Output Voltage (channel 1): 24 V
• Output Current (channel 1): 2.5 A
• Dimensions: 50 mm L x 116 mm W x 124 mm H
• Power Supply Type: Switching
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 24V
• Output Current: 2.5A
• Power Rating: 60W
• Brand/series: SDN Series
• Configuration: Enclosed
• Current, Rating: 1.3⁄0.7 A
• Frequency: 47 to 63 Hz
• Height: 4.88 in.
• Mounting Type: DIN Rail
• Number Of Outputs: 1
• Operation: Switching
• Output: 24 VDC @ 2.5 A
• Power, Output: 60 W
• Primary Type: AC-DC
• Special Features: Parallelable, PFC
• Temperature, Operating, Maximum: 60 °C
• Temperature, Operating, Minimum: -10 °C
• Voltage, Input: 85 to 264/90 to 375 VAC/VDC
• Voltage, Output: 24 VDC
• Voltage, Rating: 115⁄230 VAC
• Width: 1.97 in.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

SDN-P Specifications (Single Phase), 24 Vdc Output
1. Not UL listed for DC input.
2. Input current ratings are conservatively specified with low input, worst case
3. Losses are heat dissipation in watts at full load, nominal input line.
H x W x D (inches/mm)
Weight (lbs/kg)
Nominal Voltage
Nominal Current
-Inrush current max.
Efficiency (Losses
Power Factor Correction
Nominal Voltage
Overvoltage Protection
Nominal Current
Holdup Time
Parallel Operation
EMC:
Approvals
Temperature
Humidity
MTBF:
- Standard
Warranty
General Protection/
Safety
Status Indicators
Fusing
Mounting
Connections
Case
-Free Space
-AC Range
-DC Range
-Frequency
-Tolerance
-Ripple
efficiency and power factor.
-Current Limit
-Emissions
-Immunity
-Input
-Output
Description
4
5
1
2
3
)
EN61000-6-3, -4; Class B EN55011, EN55022 Radiated and Conducted including Annex A.
EN61000-6-1, -2; EN61000-4-2 Level 4, EN61000-4-3 Level 3; EN61000-4-6 Level 3; EN61000-4-4 Level 4 input and Level 3 output; EN61000-4-5
Isolation Class 4, EN61000-4-11;
EN60950; UL508 Listed, cULus; UL60950, cRUus, CE (LVD 73/23 & 93/68/EEC). EN61000-3-2, IEC60079-15 (Class 1, Zone 2, Hazardous
Location, Groups A, B, C, D w/ T3A temp class up to 60°C Ambient.) SEMI F47 Sag Immunity. SDN 2.5 & SDN 4 - UL60950 testing to
include approval as Class 2 power supply in accordance with UL1310.
Storage: -25
vection cooling, no forced air required). Operation up to 50% load permissible with sideways or front side up mounting orientation.
Protected against continuous short-circuit, overload, open-circuit. Protection Class 1 (IEC536),
degree of protection IP20 (IEC 529) Safe low voltage: SELV (acc. EN60950)
Green LED and DC OK signal (N.O. Solid State Contact rated 200 mA / 60 Vdc)
Internally fused. External 10 A slow acting fusing for the input is recommended to protect input wiring.
Outputs are capable of providing high currents for short periods of time for inductive load startup or switching. Fusing may be required for
wire/loads if 2x Nominal O/P current rating cannot be tolerated. Continuous current overload allows for reliable fuse tripping.
Simple snap-on system for DIN Rail TS35/7.5 or TS35/15 or chassis-mounted (optional screw mounting set SDN-PMBRK2 required).
Input: IP20-rated screw terminals, connector size range: 16-10 AWG (1.5-6 mm
flexible conductors. Output: Two connectors per output, connector size range: 16-10 AWG (1.5 - 6 mm
Fully enclosed metal housing with fine ventilation grid to keep out small parts.
Single or Parallel use is selectable via Front Panel Switch (SDN 2.5, 4 should not be used in parallel as Class 2 rating would be violated.)
(22.5 - 28.5 Vdc adj.)
> 87.5% typ. (8.6 W)
SDN 2.5-24-100P
4.88. x 1.97 x 4.55
> 820,000 hours
(124 x 50 x 116)
1.3 A. / 0.7 A
2.5 A (60 W)
90-375 Vdc
typ. < 25 A
> 50 ms
25 mm left and right, 10 mm in front
24 Vdc
1 (.45)
o
C...+85
Fold Forward (Current rises, voltage drops to maintain constant power during overload up to max peak current)
25 mm above and below,
o
C Operation. -10°-60
contact Technical Services at [phone] with any questions.
(22.5 - 25.5 Vdc adj.)
< ±2% overall (combination Line, load, time and temperature related changes)
> 88% typ. (13.1 W)
SDN 4-24-100LP
Visit our website at www.solahd.com or
2.1 A / 1.0 A
3.8 A (92 W)
Bellcore Issue 6 Method 1 Case 3 @ 40
The relative humidity is < 90% RH, noncondensing; IEC 68-2-2, 68-2-3.
24 Vdc
o
C full power with operation to 70°C possible with a linear derating to half power from 60
> 640,000 hours
4.88 x 2.56 x 4.55
(124 x 65 x 116)
typ. < 20 A
> 30 Vdc, but < 33 Vdc, auto recovery
1.5 (.68)
Installation
General
Output
Input
Power Supplies
25 mm above and below,
Units Fulfill EN61000-3-2
115/230 Vac auto select
> 88% typ. (16.4 W)
25 mm left and right,
85-132/176-264 Vac
4. Ripple/noise is stated as typical values when measured with a 20 MHz,
5. Full load, 100 Vac Input @ T
SDN 5-24-100P
15 mm in front
2.2 A / 1.0 A
5 A (120 W)
Catalog Number
bandwidth scope and 50 Ohm resistor.
210-375 Vdc
< 50 mVpp
47 - 63 Hz
5 years
o
C
2
> 100 ms
) for solid conductors. 16-12 AWG (0.5-4 mm
> 88% typ. (32.7 W)
(22.5 - 28.5 Vdc adj.)
amb
SDN 10-24-100P
4.88 x 3.26 x 4.55
> 600,000 hours
70 mm above and below, 25 mm left and right,
(124 x 83 x 116)
5 A / 2 A typ.
10 A (240 W)
= +25°C
2.2 (0.1)
24 Vdc
2
) for solid conductors.
15 mm in front
typ. < 40 A
MIL STD 217F @ 30
> 90% typ. (48 W)
SDN 20-24-100P
4.88 x 6.88 x 4.55
> 510,000 hours
(124 x 175 x 116)
20 A (480 W)
9 A/ 3.9 A
3 (1.36)
o
C to 70
N/A
2
) for
ATEX 05 21715U
DEMK0 06
o
C (Con-
4
o
C
107