SDN5-24-100C SOLA HEVI DUTY, SDN5-24-100C Datasheet - Page 3

• Manufacturer Part Number: SDN5-24-100C
• Description: Linear & Switching Power Supplies 120W 24V 5A
• Manufacturer: SOLA HEVI DUTY
• Type: Industrialr

Specifications of SDN5-24-100C

• Output Power Rating: 120 W
• Input Voltage: 85 VAC to 264 VAC
• Number Of Outputs: 1
• Output Voltage (channel 1): 24 V
• Output Current (channel 1): 5 A
• Mounting Style: DIN Rail
• Brand/series: SDN Series
• Configuration: Enclosed
• Mounting Type: DIN Rail
• Operation: Switching
• Output: 24 VDC @ 5 A
• Power, Output: 120 W
• Primary Type: AC-DC
• Special Features: Parallelable, PFC
• Voltage, Input: 85 to 264/90 to 375 VAC/VDC
• Voltage, Output: 24 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SDN-C Specifications (Single Phase)
1. Not UL listed for DC input.
2. Input current ratings are conservatively specifi ed with low input, worst case
3. Losses are heat dissipation in watts at full load, nominal input line.
H x W x D (inches/mm)
Weight (lbs/kg)
Nominal Voltage
-AC Range
-DC Range
-Frequency
Nominal Current
-Inrush current max.
Efficiency (Losses
Power Factor Correction
Nominal Voltage
-Tolerance
Initial Voltage Setting
-Ripple
PARD
Overvoltage Protection
Power Back Immunity
Nominal Current
-Peak Current
-Short Circuit Current
-Current Limit
Parallel Operation
Holdup Time
Voltage Fall Time
Line and Load Regulation
EMC:
Approvals
Temperature
MTBF
Warranty
General Protection/Safety
Status Indicators
Fusing
Mounting
Connections
Case
-Free Space
effi ciency and power factor.
-Emissions
-Immunity
-Input
-Output
6
4
Description
1
7
5
2
3
)
Switch selectable single unit or parallel unit operation. Units will not be damaged by parallel operation (regardless of switch position setting).
EN61000-6-1:2001, EN61000-6-2:2001, EN61000-4-2 Level 4, EN61000-4-3 Level 3, EN61000-4-6 Level 3, EN61000-4-4 Level 4 input
Outputs are capable of providing high currents for short periods of time for inductive load startup or switching. Fusing may be required for
Storage: -40
UL508 Listed, cULus; UL 60950-1, cURus; IEC60950-1; Class I, Div. 2, Hazadous location approval; CE (LVD 73/23 & 2004/108/EC),
4.88 × 1.97 × 4.55 (124 × 50 × 116)
EN61000-6-2:2001, EN61000-6-3:2001, Class B EN55011, EN55022 Radiated and Conducted including Annex. A, EN61000-3-2
wire/loads if 2x Nominal O/P current rating cannot be tolerated. Continuous current overload allows for reliable fuse tripping.
> 90% typ. (12 W)
and level 3 output. EN61000-4-5 Isolation class 4, EN61000-4-11, IEC 61000-4-34 voltage dip immunity standard
no forced air required). Operation up to 50% load permissible with sideways or front side up mounting orientation.
SDN 5-24-100C
contact Technical Services at [phone] with any questions.
1.65 - 0.55 A
o
Protection Class 1 (IEC536), degree of protection IP20 (IEC60529) Safe low voltage: SELV (acc. IEC60950-1)
Typ. < 15 A
5 A (120 W)
C to + 85
1.65 (0.75)
Output: Two terminals per output, connector size range: 16-10 AWG (1.5-6 mm
Input: Screw terminals, connector size range: 16-10 AWG (1.5-6 mm
Protected against continuous short -circuit, continuous overload, continuous open circuit.
o
C, Operation -25
Visit our website at www.solahd.com or
< ±2 % overall (combination Line, load, time and temperature related changes)
1.5 × Nominal Current for 2 seconds minimum while holding voltage > 20 Vdc
Fully enclosed metal housing with fi ne ventilation grid to keep out small parts.
>20 ms (Full load, 100 Vac Input @ T
15 mm in front, 25 ~ 40 mm above and below, 10 mm left and right.
PARD (Periodic and Random Deviation) = 100 mV peak-peak max
<150 mS from 95% to 10% rated voltage @ full load (T
1.5 x Nominal Current at near zero volts at short circuit condition
> 550,000 hrs
< 50 mVpp
Simple snap-on to DIN TS35/7.5 or TS35/15 rail system.
o
C to +60
Active power factor correction to better than 0.92
Installation
(EMC 89/336 & 93/68/EEC); EN61000-3-2
Visual: 3 status LEDs (Input, Output, Alarm)
General
Relay: N.O. contact rated 200ma/50 Vdc
Output
Input
Power Supplies
4.88 × 2.36 × 4.55 (124 × 60 × 116)
> 30.5 but < 33 Vdc, auto recovery
o
C full power, with linear derating to half power from 60 to 70
4. Ripple/noise is stated as typical values when measured with a 20 MHz, bandwidth
5. Peak current is calculated at 24 Volt levels.
6. Demonstrated through extended life test.
7. Contact tech support for operation at -25
24 V (23.5~28.5 Vdc Adj.)
scope and 50 Ohm resistor.
> 90% typ. (24 W)
43-67 Hz, 400 Hz
SDN 10-24-100C
Catalog Number
Internally fused
PowerBoost™
90 - 375 Vdc
10 A (240 W)
115/230 Vac
85 - 264 Vac
24.5V ± 1%
3.2 - 1.0 A
Typ.< 30 A
1.98 (0.9)
< 0.5%
5 Years
< 35V
amb
=+25°C) to 95% output voltage
amb
2
) for solid conductors.
=+25°C)
2
) for solid conductors.
o
4.88 x 3.42 x 4.98 (124 x 87 x 126.6)
C.
SDN 20-24-100C
> 450,000 hrs
> 92% (38 W)
20 A (480W)
<100mVpp
o
2.6 (1.2)
C (Convection cooling,
6A / 3A
< 40 A
4
103