SDP2-24-100T SOLA HEVI DUTY, SDP2-24-100T Datasheet - Page 2

• Manufacturer Part Number: SDP2-24-100T
• Description: Linear & Switching Power Supplies 24-28V 2.1A Output
• Manufacturer: SOLA HEVI DUTY
• Type: Industrialr

Specifications of SDP2-24-100T

• Product: Switching
• Output Power Rating: 50 W
• Number Of Outputs: 1
• Output Voltage (channel 1): 24 V
• Output Current (channel 1): 2.1 A
• Dimensions: 91 mm L x 45 mm W x 75 mm H
• Power Supply Type: Switching
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 24V
• Output Current: 2.1A
• Power Rating: 50.4W
• Input Voltage: 85V AC To 264V AC / 90V DC To 375V DC
• Brand/series: SDP Series
• Configuration: Enclosed
• Current, Rating: 1.1⁄0.7 A
• Frequency: 47 to 63 Hz
• Height: 2.95 in.
• Mounting Type: DIN Rail
• Operation: Switching
• Output: 24 to 28 VDC @ 2.1 A
• Power, Output: 100 W
• Primary Type: AC-DC
• Temperature, Operating, Maximum: 60 °C
• Temperature, Operating, Minimum: -10 °C
• Voltage, Input: 85 to 264/90 to 375 VAC/VDC
• Voltage, Output: 24 to 28 VDC
• Voltage, Rating: 85 to 264 VAC⁄90 to 375 VDC
• Width: 1.77 in.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

SDP™ Series Specifications (24 V models)
Notes:
1. Not UL listed for DC input.
2. Ripple/noise is stated as typical values when measured with a 20 MHz, bandwidth scope and 50 Ohm resistor.
3. For all models except SDP 4-24-100LT.
Input Voltage
Input Frequency
Input Current
External Fusing
Hold-Up Time
Efficiency
Losses
Output Voltage
Voltage Regulation
Ripple/Noise
Overvoltage Protection (OVP)
Output Noise
Suppression
Rated Continuous
Loading
Overload Behavior
Protection
Power Back Immunity
Status Indicators
Case & Mounting
(H x W x D) (in/mm)
Weight - lbs (kg)
Mounting Orientation
Ventilation/Cooling
Connection
Temperature
MTBF
Humidity
Electromagnetic
Emissions (EME)
Electromagnetic
Immunity (EMI)
Safe Low Voltage
Protection Class/Voltage
Warranty
CB Scheme, EN60950, UL60079-15 (Class 1, Zone 2 Hazardous Locations, Temp Class T3), UL508 Listed, cULus, UL 60950, cURus, CE (LVD 73/23 & 93/68/EEC). (EMC
89/336 & 93/68/EEC). EN61000-3-2, NEC Class 2 power supply acc. To NFPA 70 art. 725-41 (a)(2).
•Free space for cooling
•Connector size range
Description
2
1
SDP 06-24-100T
0.63 A @ 24 Vdc /
(75 x 22.8 x 96.7)
0.54 A @ 28 Vdc
0.35 lbs (.16 kg)
2.95 x 0.9 x 3.8
0.4 A / 0.25 A
< 3.75 W typ.
> 80% typ.
Storage: -25°C...+85°C Operation: -10°...+60°C full power with linear derating to half power from 60°C to 70°C.
contact Technical Services at [phone] with any questions.
Input: screw terminals, connector size range: 20-12AWG (1.5 - 6 mm
> 30 Vdc, but < 33 Vdc, auto recovery
EN61000-6-2 (Includes EN61000-6-1) (EN55024) Criterion A: no derogation of performance
Continuous operation at overload/short-circuit: up to 1.5 x Nominal Current Continuous
24 V (22.5 - 28.5 Vdc Adj.)
85-264 Vac, 90-375 Vdc
Molded plastic housing using UL 94 approved flameproof material rating 94V-2.
Visit our website at www.solahd.com or
Unit is continuously protected against short-circuit, overload and open-circuit.
Standard: Vertical; Optional: Horizontal or on top (Contact Technical Services).
SDP 1-24-100T
1.3 A @ 24 Vdc /
> 500,000 hours according to Telcordia/Bellcore Document SR-332, Issue 1.
1.1 A @ 28 Vdc
Normal convection, no fan required; Above/below: 25 mm recommended.
0.7 A / 0.4 A
EN61000-6-3 (Includes EN61000-6-4) Class B (EN 55022) incl. Annex A
< 6.1 W typ.
> 83% typ.
2.95 x 1.77 x 3.58 (75 x 45 x 91)
Not required. Unit provides internal fuse (T3A, not accessible)
Simple snap-on to DIN TS35/7.5 or TS35/15 rail system.
Up to 90% RH, noncondensing; IEC 68-2-2, 68-2-3
0.5 lbs (.23 kg)
(Convection cooling, no forced air required).
IP20 (IEC529), Protection Class 1 (IEC536)
Static 0.5% V
Dimensions
Radiated EMI values below EN61000-6-2
Installation
General
Output
Safety
Input
Power Supplies
Green LED on, when V
SELV (acc. EN60950)
SDP 2-24-100T
2.1 A @ 24 Vdc /
Catalog Number
1.8 A @ 28 Vdc
out
1.1 A / 0.7 A
< 8.1 W typ.
> 86% typ.
, dynamic + 2% V
< 50 mVpp
47-63 Hz
> 25 ms
3 years
3
35 V
out
“OK”.
out
overall\
24 V (24 - 25.7 Vdc Adj.)
2
) for solid or stranded conductors.
> 26 Vdc, but < 27.2
Vdc, auto recovery
SDP 4-24-100LT
3.8 A @ 24.5 Vdc
1.8 A / 1.0 A
85-132 / 176-264 Vac, 210-375 Vdc
(75 x 72.5 x 96.7)
2.95 x 2.85 x 3.8
0.7 lbs (.32 kg)
< 12 W typ.
> 88% typ.
24 V (22.5 - 28.5 Vdc Adj.)
> 30 Vdc, but < 33 Vdc,
4.2 A @ 24.5 Vdc /
SDP 4-24-100RT
3.6 A @ 28 Vdc
auto recovery
2.2 A / 1.2 A
4
119