SDN40-24-480 SOLA HEVI DUTY, SDN40-24-480 Datasheet - Page 3

• Manufacturer Part Number: SDN40-24-480
• Description: Linear & Switching Power Supplies 3PH 24-28VDC 40A
• Manufacturer: SOLA HEVI DUTY
• Type: Industrialr

Specifications of SDN40-24-480

• Product: Switching
• Output Power Rating: 960 W
• Output Voltage (channel 1): 24 V
• Output Current (channel 1): 40 A
• Dimensions: 282 mm L x 116 mm W x 124 mm H
• Power Supply Type: Switching
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 24V
• Output Current: 40A
• Power Rating: 960W
• Input Voltage: 340V AC To 576V AC / 450V DC To 820V DC
• Brand/series: SDN Series
• Configuration: Enclosed
• Current, Rating: 3.0 A (Nom.)
• Frequency: 47 to 63 Hz
• Height: 4.88 in.
• Mounting Type: DIN Rail/Panel
• Number Of Outputs: 1
• Operation: Switching
• Output: 24 VDC @ 40 A
• Power, Output: 960 W
• Primary Type: AC-DC
• Special Features: Parallelable, PFC
• Temperature, Operating, Maximum: 60 °C
• Temperature, Operating, Minimum: -10 °C
• Voltage, Input: 340 to 576/450 to 820 VAC/VDC
• Voltage, Output: 24 VDC
• Voltage, Rating: 380 to 480 VAC
• Width: 11.1 in.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

SDN
1. For the SDN 20-24-480C, single phase input is permissible, but output is derated
2. Not UL listed for DC input.
3. Input current ratings are conservatively specified with low input, worst case
H x W x D
(inches/mm)
Weight (lbs/kg)
Nominal Voltage
-AC Range
-DC Range
-Frequency
Nominal Current
-Inrush current max.
Efficiency (Losses
Power Factor
Correction
Nominal Voltage
-Tolerance
-Ripple
Overvoltage
Protection
Nominal Current
-Peak Current
-Current Limit
Holdup Time
Parallel Operation
EMC:
-Emissions
Approvals
Temperature
MTBF:
- Standard
Warranty
General Protection/
Safety
Status Indicators
Fusing
-Input
-Output
Mounting
Connections
Case
-Free Space
-Immunity
efficiency and power factor.
to 75% (15 Amps @ 24 Vdc).
TM
Description
5
Specifications (Three Phase)
2
7
6
3
4
)
EN61000-6-3, -4; Class B EN55011, EN55022 Radiated and Conducted including Annex A.
EN61000-6-1, -2; EN61000-4-2 Level 4, EN61000-4-3 Level 3; EN61000-4-6 Level 3; EN61000-4-4
Level 4 input and Level 3 output; EN61000-4-5 Isolation Class 4, EN61000-4-11;
CB Scheme, EN60950; UL508 Listed, cULus; UL60950, cRUus, CE (LVD 73/23 & 93/68/EEC). EN61000-3-2, UL60079-15
Class 1, Zone 2 Hazardous Location, Groups IIA, IIB, IIC w/T3 temp class up to 60°C Ambient.
Storage: -25°C...+85°C Operation. -10°C -60°C full power with operation to 70°C possible with a linear derating to half power from 60°C to 70°C
(Convection cooling, no forced air required). Operation up to 50% load permissible with sideways or front side up mounting orientation. The relative
humidity is < 90% RH, noncondensing; IEC 68-2-2, 68-2-3.
Protected against continuous short-circuit, overload, open-circuit. Protection Class 1 (IEC536), degree of protection IP20 (IEC 60529) Safe low voltage:
SELV (acc. EN60950)
Green LED on when V
2x Nominal Current < 2 sec.
5A through 30A units may be passively paralleled by selecting the “P” position of the switch on the unit. The SDN 40 contains active current balancing.
Input: IP20-rated screw terminals, connector size range: 16-10 AWG (1.5-6 mm
Outputs are capable of providing high currents for short periods of time for inductive load startup or switching. Fusing may be required for wire/loads
> 1,110,000 hours
> 90% typ. (12 W)
25 mm above and below, 25 mm left and right,
4.88 x 2.91 x 4.55
SDN 5-24-480
(124 x 73 x 116)
1.7 lbs (.77 kg)
5 A (120 W)
Simple snap-on system for DIN Rail TS35/7.5 or TS35/15 or chassis-mounted (optional screw mounting set SDN-PMBRK2 required).
0.5 A
6A,
1Ø or 3Ø 380-480 Vac
if 2x Nominal O/P current rating cannot be tolerated. Continuous current overload allows for reliable fuse tripping.
Fold Forward (Current rises, voltage drops to maintain constant power during overload up to max peak current)
out
15 mm in front
Output: Two connectors per output, connector size range: 16-10 AWG (1.5-6 mm
= 18V or greater.
> 40 ms
2x Nominal Current < 2 sec.
SDN 10-24-480
< ±2% overall (combination Line, load, time and temperature related changes)
> 940,000 hours
Fully enclosed metal housing with fine ventilation grid to keep out small parts.
4.88 x 3.5 x 4.55
2.16 lbs (.98 kg)
(124 x 89 x 116)
10 A (240 W)
typ. < 18 A
0.8 A
12A,
> 90% typ. (48 W)
> 30 Vdc, but < 33 Vdc, auto recovery
Installation
General
Output
Input
24 Vdc (22.5 - 28.5 Vdc adj.)
Power Supplies
2x Nominal Current < 2 sec.
Units Fulfill EN61000-3-2
MIL STD 217F @ 30
4. Losses are heat dissipation in watts at full load, nominal input line.
5. Ripple/noise is stated as typical values when measured with a 20 MHz, bandwidth
6. Full load, 100 Vac Input @ T
7. For the SDN 40-24-480, output: one (+) two (-) connectors, size range 16-5 AWG
SDN 20-24-480C
Catalog Number
> 550,000 hours
(124 x 150 x 116)
3.97 lbs (1.8 kg)
4.88 x 5.9 x 4.55
380 - 480 Vac
Internally fused
450 - 820 Vdc
340 - 576 Vac
20 A (480 W)
scope and 50 Ohm resistor.
(1.5016 mm
< 50 mVpp
47 - 63 Hz
1Ø or 3Ø
> 28 ms
5 years
1.5 A
25A,
70 mm above and below, 25 mm left and right , 15 mm in front
2
) for solid conductors. 16-12 AWG (0.5-4 mm
2
) solid conductor.
1
o
C
35A, 2x Nominal Current
amb
> 90% typ. (72 W)
SDN 30-24-480
> 620,000 hours
4.88 x 9.72 x 4.55
(124 x 247 x 116)
4 lbs (1.81 kg)
= +25°C
30 A (720 W)
< 2 sec.
2.0 A
2
) for solid conductors.
3Ø 380 - 480 Vac
typ. < 30 A
> 20 ms
45A, 2x Nominal Current
2
) for flexible conductors.
> 90% typ. (96 W)
SDN 40-24-480
4.88 x 11.1 x 4.55
> 490,000 hours
(124 x 282 x 116)
6.6 lbs (2.99 kg)
40 A (960 W)
< 2 sec
3.0 A
4
109