POE80U-560(G)-R PHIHONG USA, POE80U-560(G)-R Datasheet - Page 3

• Manufacturer Part Number: POE80U-560(G)-R
• Description: Plug-In AC Adapters 80W 56V 1.43A Single Port Injector
• Manufacturer: PHIHONG USA
• Type: Power Over Ethernetr

Specifications of POE80U-560(G)-R

• Mounting Style: POE
• Input Voltage (nominal): 90 VAC to 264 VAC
• Number Of Outputs: 1
• Output Power Rating: 80 W
• Output Voltage (channel 1): 56 V
• Output Current (channel 1): 0.72 A
• Dc Output Connector: RJ45 Connector
• Ac Plug Included/required: Included
• Commercial/medical: Commercial
• Brand/series: POE80U Series
• Configuration: Enclosed
• Mounting Type: Panel
• Output: 56 VDC @ 1.43 A
• Power, Output: 80 W
• Primary Type: AC-DC
• Voltage, Input: 90 to 264 VAC
• Voltage, Output: 56 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

INPUT:
AC Input Voltage Range
90 to 264VAC
AC Input Voltage Rating
100 to 240VAC,47-63Hz
AC Input Current
1.25A(RMS) max. for 90VAC
0.9A(RMS) max. for 240VAC
Leakage Current
0.25mA max. @ 254VAC 60Hz
AC Inrush Current
15A(RMS) max. for 115VAC
20A(RMS) max. for 230VAC
OUTPUT:
Total Output Power
80W
DC Offset
No Data degradation with DC imbalance 18mA per min.
Efficiency
65% (typical) at Max. load, and 120VAC 60Hz
Hold-up Time
16mS min. 120VAC and max. load
Transient O/P Voltage Protection
60V max.
ENVIRONMENTAL:
Temperature
Operation
Non-operation
Humidity
Operation
POE80U Characteristics
-40 to +55°C
-40 to +70°C
5 to 90%
EMC
FCC Part 15 Class B
EN55022 Class B
Isolation Test
Primary to Secondary: 3000VAC for 1 minute 10mA
Primary to F.G.: 1500VAC for 1 minute
Output to F.G.: 1500VAC
Immunity
ESD:
RS:
EFT:
Surge:
CS:
Voltage Dips
Harmonic:
Insulation Resistance
Primary to secondary: >10M OHM 500VDC
Primary to FC: >10M OHM 500VDC
FEATURE:
Detection
Same as IEEE802.3af except 12.5kohm detection
resistor value required at Powered device.
Over Voltage/Current, Short Circuit Protection
Outputs equipped with short circuit protection and overload
protection as per 802.3af specification except max average
pair current is 0.72A, Peak 1.4A per pair
The output can be shorted permanently without damage
Indicators
Led #1 indicator for input power “on” GREEN
Led #2 Indicator for fault-RED
Led #3 Indicator that Detected and Connected to valid
IEEE802.3af load-GREEN
Input Connector
IEC320 inlet 3 pin
EN61000-4-2. Level 3
EN61000-4-3. Level 2
EN61000-4-4. Level 2
EN61000-4-5. Level 3
EN61000-4-6. Level 2
EN61000-4-11
EN61000-3-2