WTA24-24SX-Y-C2 ETA-USA, WTA24-24SX-Y-C2 Datasheet - Page 2

Plug-In AC Adapters 20W SINGLE OUTPUT WALLMOUNT ADAPTER

WTA24-24SX-Y-C2

Manufacturer Part Number
WTA24-24SX-Y-C2
Description
Plug-In AC Adapters 20W SINGLE OUTPUT WALLMOUNT ADAPTER
Manufacturer
ETA-USA
Datasheet

Specifications of WTA24-24SX-Y-C2

Mounting Style
Wall
Input Voltage (nominal)
90 VAC to 264 VAC
Number Of Outputs
1
Output Power Rating
24 W
Output Voltage (channel 1)
24 V
Output Current (channel 1)
1 A
Ac Plug Included/required
Included
Commercial/medical
Commercial
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
NOTE: The ripple and noise are as follows when measure with Max. Bandwidth of 20 MHz and parallel 10uF/0.1uF,
cross-connected at testing point.
3) PROTECTION:
4) ENVIRONMENT
ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com
2.1)
2.2)
2.3) Ripple/Noise (Vp-p): 1% (20MHz Bandwidth)
3.1) Short Circuit Protection:
3.2) Over Power Protection:
3.3) Over Voltage Protection:
4.1) Operating Temperature:
4.2) Storage Temperature:
4.3) Relative Humidity:
4.4) Vibration:
4.5) Dropping (packed):
Hold up time:
Rise Time: 20mS Max. At 115Vac input and output Max. Load.
5% (0°C) ~ 90%(40°C) RH, 72Hrs, Full load, Normal operating
4.4.1) Operating: IEC 721-3-3 3M3
4.4.2) Transportation: IEC 721-3-2 2M2
The power supply will be auto recovery when short circuit faults remove; pulsing mode.
0°C to 40°C, ambient
-20°C to 80°C ambient
The power supply will be auto recovery.
Built-in.
1 corner, 3 edges, and 6 surfaces
Total power protection at normal AC input voltage,
3 Axes, 10 cycles per axis.
5~9Hz, A=3.5mm
9~200Hz, Acceleration=5m/s
200~500Hz, Acceleration=15m/s
(No permanent damage may occur during testing.
5~9Hz, A=1.5mm
9~200Hz, Acceleration 5m/s
The product has to restore to its original situation after power off/on.)
16ms minimum at full load @ 115VAC
2
2
2

Related parts for WTA24-24SX-Y-C2