DPO3EMBD Tektronix, DPO3EMBD Datasheet - Page 10

• Manufacturer Part Number: DPO3EMBD
• Description: Benchtop Oscilloscopes Embd. serial trigger and analysis module
• Manufacturer: Tektronix

Specifications of DPO3EMBD

• Equipment Type: Application Module
• Sampling Rate: 2.5 GS/s
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MSO/DPO3000 Series Mixed Signal Oscilloscopes

10
Digital Phosphor Oscilloscopes
Waveform Measurements
Cursors – Waveform and Screen.
Automatic Measurements – 29, of which up to
four can be displayed on screen at any one time.
Measurements include: Period, Frequency, Delay,
Rise Time, Fall Time, Positive Duty Cycle, Negative
Duty Cycle, Positive Pulse Width, Negative Pulse
Width, Burst Width, Phase, Positive Overshoot,
Negative Overshoot, Peak to Peak, Amplitude, High,
Low, Max, Min, Mean, Cycle Mean, RMS, Cycle
RMS, Rising Edge Count, Falling Edge Count,
Positive Pulse Count, Negative Pulse Count, Area
and Cycle Area.
Measurement Statistics – Mean, Min, Max,
Standard Deviation.
Reference Levels – User-definable reference levels
for automatic measurements can be specified in
either percent or units.
Gating – Isolate the specific occurrence within an
acquisition to take measurements on, using either
the screen, or waveform cursors. Measurements use
full record by default.
Waveform Math
Arithmetic – Add, subtract, multiply and divide
waveforms.
Math Functions – Integrate, Differentiate, FFT.
FFT – Spectral magnitude. Set FFT Vertical Scale
to Linear RMS or dBV RMS and FFT Window
to Rectangular, Hamming, Hanning, or
Blackman-Harris.
Advanced Math – Define extensive algebraic
expressions including waveforms, math functions,
scalars, up to two user-adjustable variables and
results of parametric measurements e.g.,(Intg(Ch1-
Mean(Ch1)) x 1.414 x VAR1).
Software
NI LabVIEW SignalExpress
A fully interactive measurement software environ-
ment optimized for the DPO3000 Series, enables
you to instantly acquire, generate, analyze, compare,
import and save measurement data and signals
using an intuitive drag-and-drop user interface that
does not require any programming.
Standard DPO3000 Series support for acquiring,
controlling, viewing and exporting your live signal
data. A 30-day trial period of the Full Version
provides additional signal processing, advanced
analysis, mixed signal, sweeping, limit testing and
user-defined step capabilities. Order SIGEXPTE for
permanent Full Version capability.
OpenChoice
communication between a Windows PC and the
DPO3000 Series, via USB or LAN. Transfer and save
settings, waveforms, measurements and screen
images.
IVI Driver – Provides a standard instrument
programming interface for common applications
such as LabVIEW, LabWindows/CVI, Microsoft .NET
and MATLAB.
DPO3000 Series
DPO3000 • www.tektronix.com/oscilloscopes
®
Desktop – Enables fast and easy
™
Tektronix Edition –
Display Characteristics
Display Type – 9 in. (228.6 mm) wide format liquid
crystal TFT color display.
Display Resolution – 800 horizontal x 480 vertical
pixels (WVGA).
Waveform Styles – Vectors, Dots, Variable
Persistence, Infinite Persistence.
Graticules – Full, Grid, Cross Hair, Frame,
IRE and mV.
Format – YT and XY.
Waveform Capture Rate – Up to 50,000 wfm/s.
Input/Output Ports
USB 2.0 High Speed Host Port – Supports
USB mass storage devices and printers. One port
available on rear-panel and one on front-panel.
USB 2.0 High Speed Device Port – Rear panel
connector allows for control of oscilloscope via
USBTMC or GPIB with a TEK-USB-488.
LAN Port – RJ-45 connector, supports10/100Base-T.
Video Out Port – DB-15 female connector, connect
to show the oscilloscope display on an external
monitor or projector.
Auxiliary Input – Front panel BNC connector. Input
Impedance 1MΩ. Max input 300V
peaks ≤± 450 V.
Probe Compensator Output – Front panel pins.
Amplitude 2.5 V. Frequency 1 kHz.
Trigger Out – Rear-panel BNC connector, provides a
positive polarity pulse when the oscilloscope triggers.
Kensington Lock – Rear-panel security slot
connects to standard Kensington lock.
Power Source
Power Source Voltage – 85 to 265 V ±10%.
Power Source Frequency – 45 to 440 Hz (85 to
265 V).
Power Consumption – 120 W maximum.
Optional TekVPI
Output Voltage – 12 V; Output Current – 5 A;
Power Consumption – 60 W.
®
Power Supply –
RMS
Cat II with
Physical Characteristics
Dimensions
Height
Width
Depth
Weight
Net
Shipping
Rackmount Configuration
Cooling Clearance
General Characteristics
Environmental
Temperature
Operating – 0 °C to +50 °C.
Non-operating – –40 °C to +71 °C.
Humidity
Operating – High: 30 °C to 50 °C, 5% to
45% Relative Humidity, Low: 0 °C to 30 °C,
5% to 95% Relative Humidity.
Non-operating – High: 30 °C to 50 °C, 5% to
45% Relative Humidity, Low: 0 °C to 30 °C,
5% to 95% Relative Humidity.
Altitude
Operating – 3,000 meters (9,843 feet).
Non-operating – 12,000 meters (39,370 feet).
Random Vibration
Operating – 0.31 G
minutes each axis, 3 axes, 30 minutes total.
Non-operating – 2.46 G
minutes each axis, 3 axes, 30 minutes total.
Regulatory
Electromagnetic Compatibility – 89/336/EEC.
Safety – UL61010-1,Second Edition; CAN/CSA
C22.2 No. 1010.1 1992, EN61010-1:2001; IEC
61010-1:2001.
RMS
left side and rear of instrument
from 5 to 500 Hz, 10
203.2
416.6
137.2
RMS
mm
4.17
8.62
2 in. (51mm) required on
kg
from 5 to 500 Hz, 10
5U
16.4
lbs.
5.4
9.2
in.
19
8