1667-18S Techspray, 1667-18S Datasheet - Page 4

• Manufacturer Part Number: 1667-18S
• Description: Chemicals Blue Shower II, 18 oz aerosol
• Manufacturer: Techspray
• Type: Degreaserr

Specifications of 1667-18S

• Product: Cleaners & Degreasers
• Size: 18 oz
• Container: Aerosol
• Application: Precision cleaning of polar and nonpolar soils, including hand oils, solder oils, greases, silicone, fluxes, and similar soils. Excellent for tape head cleaning and general degreasing.
• Boiling Point: 58 °C
• Chemical Component: 1, 3-Dichloro-1, 1, 2, 2, 3-Pentafluoropropane/3, 3-Dichloro-1, 1, 1, 2, 2-Pentafluoropropane/Aerosol-1, 1, 1, 2-Tetrafluoroethane/Carbon Dioxide (Aerosol Propellant)/Ethanol/Methanol/Nitromethane
• Dispensing Method: Aerosol
• Evaporation: 1 (Min.)
• Primary Type: Cleaner
• Special Features: Non-Flammable
• Weight: 18 Oz.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5. FIRE FIGHTING MEASURES
6. ACCIDENTAL RELEASE MEASURES
7. HANDLING AND STORAGE
Blue Shower II
convulsing person. Immediately contact a poison control center, emergency room or physician as further treatment
may be necessary.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained
personnel. Seek immediate medical attention.
FLASHPOINT AND METHOD: None
FLAMMABLE LIMITS: NA to NA
EXTINGUISHING MEDIA: Use alcohol foam, carbon dioxide, or water spray when fighting fires involving this
material.
FIRE FIGHTING PROCEDURES: Use water spray to keep fire-exposed containers cool and to knock down
vapors which may result from product decomposition.
FIRE FIGHTING EQUIPMENT: As in any fire, wear self-contained breathing apparatus pressure-demand,
(MSHA/NIOSH approved or equivalent) and full protective gear.
HAZARDOUS DECOMPOSITION PRODUCTS: Toxic oxides of carbon and corrosive vapors of hydrogen
chloride.
SMALL SPILL: Contain spill with dike to prevent entry into sewers.
LARGE SPILL: If this material is released into a work area, evacuate the area immediately.
GENERAL PROCEDURES: Dike area to contain spill. Take precautions as necessary to prevent contamination
of ground and surface waters. Recover spilled material on adsorbent, such as sawdust or vermiculite, and sweep into
closed containers for disposal. After all visible traces, including vapors, have been removed thoroughly wet vacuum
the area. Do not flush to sewer. If area of spill is porous, remove as much contaminated earth, gravel, etc. as
necessary and place in closed containers for disposal.
SPECIAL PROTECTIVE EQUIPMENT: Only personnel equipped with proper respiratory and skin/eye
protection should be permitted in area. See Section 8 for details.
GENERAL PROCEDURES: Use only in a well ventilated area.
HANDLING: Use with sufficient ventilation to keep employee exposure below recommended limits. Provide
adequate ventilation for storage, handling and use, especially for enclosed or low spaces. Avoid contact of liquid
with eyes and prolonged skin exposure. Do not allow product to contact open flame or electrical heating elements
because dangerous decomposition products may form.