1668-18S Techspray, 1668-18S Datasheet - Page 5

• Manufacturer Part Number: 1668-18S
• Description: Chemicals Contact Cleaner II, 18 oz aerosol
• Manufacturer: Techspray
• Type: Contactr

Specifications of 1668-18S

• Product: Cleaners & Degreasers
• Size: 18 oz
• Container: Aerosol
• Application: Non-flammable, safe on most plastics, rapidly evaporating, zero residue, non-corrosive
• Boiling Point: 54 °C
• Chemical Component: 1, 3-Dichloro-1, 1, 2, 2, 3-Pentafluoropropane/3, 3-Dichloro-1, 1, 1, 2, 2-Pentafluoropropane/Acetone/1, 1, 1, 2-Tetrafluoroethane/Carbon Dioxide (Aerosol Propellant)/Nitromethane
• Dispensing Method: Aerosol
• Evaporation: > 1
• Primary Type: Cleaner
• Special Features: Non-Flammable
• Weight: 18 Oz.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8. EXPOSURE CONTROLS / PERSONAL PROTECTION
9. PHYSICAL AND CHEMICAL PROPERTIES
Chemical Name
3,3-Dichloro-1,1,1,2,2-pentafluoropropane (HCFC-
225ca)
1,3-Dichloro-1,1,2,2,3-pentafluoropropane (HCFC-
225cb)
1,1,1,2-Tetrafluoroethane (HFC-134a)
Acetone
Contact Cleaner II
EXPOSURE GUIDELINES:
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to
control airborne levels below recommended exposure limits.
PERSONAL PROTECTIVE EQUIPMENT
OTHER USE PRECAUTIONS: Emergency shower and eyewash facility should be in close proximity.
PHYSICAL STATE: Liquid
ODOR: Faint ethereal odor
APPEARANCE: Clear, Colorless liquid
pH: 6.9
OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200)
OSHA TABLE COMMENTS:
1. NOT ESTABLISHED
2. * (AEL)=Acceptable Exposure Limit as established by the manufacture
3. NL = Not Listed
EYES AND FACE: For normal conditions, wear safety glasses. Where there is reasonable probability of liquid
contact, wear splash-proof goggles.
SKIN: The glove(s) listed below may provide protection against permeation. Gloves of other chemically
resistant materials may not provide adequate protection. Viton, Solvex, Butyl, Buna, Neoprene.
RESPIRATORY: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements
must be followed whenever workplace conditions warrant a respirator's use.
TWA
TWA
TWA NE
TWA
STEL
OSHA PEL
ppm
[1]
750
ppm
1000
ppm
[3]
mg/m
1800
mg/m3
2400
mg/m3
3
EXPOSURE LIMITS
ACGIH TLV
ppm
NE
750
ppm
1000
ppm
mg/m
1780
mg/m3
2380
mg/m3
3
Supplier OEL
ppm
50*
ppm
400*
ppm
1,000
ppm
NL
ppm
NL
ppm
[2]
mg/m
NL mg/
m3
NL mg/
m3
3