14050 AIM - American Iron and Metal, 14050 Datasheet
14050
Manufacturer Part Number
14050
Description
Solder, Fluxes & Accessories SAC305 GLOWCORE 2.5% .062 DIA 1 lb.
Manufacturer
AIM - American Iron and Metal
Datasheet
1.14076.pdf
(2 pages)
Specifications of 14050
Description/function
Lead Free GLOW CORE No-Clean
Alloy
SAC305
Diameter
0.062 in
Weight
1 lb
Core Size
3%
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
14050B/BEAJC
Manufacturer:
MOTOROLA/摩托罗拉
Quantity:
20 000
Part Number:
14050Q
Manufacturer:
TI/德州仪器
Quantity:
20 000
Features:
- Excellent Wetting
Description:
Glow Core is a no-clean, resin-based flux cored wire solder designed to offer excellent wetting characteristics and
lead-free compatibility. This product is very active and is recommended for fast cycle time soldering. Glow Core
flux promotes good thermal transfer, offering better solder penetration into plated through holes or surface mount
interconnections. Glow Core cored wire produces low-to-medium post-process residues that are electrically safe
and do not require cleaning for most applications. IPC flux classification for this material is REL0.
Availability:
-
-
-
-
-
Application:
-
-
-
-
-
Cleaning:
Glow Core can be cleaned with saponified tap water or an alcohol and water blend. AIMTERGE 520 is
recommended. A water temperature of 60ºC (140°F) is recommended, and should be adequate for removing any
post process residues.
Handling and Storage:
-
-
-
Safety:
-
-
-
Surface Insulation Resistance:
Surface Insulation Resistance (SIR) test for cored wire flux was carried out according to J-STD-004 and IPC-TM-
650 method 2.6.3.3.
Solder iron tip temperature should be between 350° - 400°C (650° - 750°F ) for Sn63, Sn62 and Sn60 alloys,
Hold the solder iron tip at a 45° to 60° angle to the work surface.
The solder iron should contact both the component lead and PCB pad surface.
Solder and flux should flow onto the lead and pad or lead and barrel to promote optimum flux activity for the
If additional flux is needed, the use of AIM’s NC266-3 flux is recommended. Operators should use an
Glow Core cored wire has an indefinite shelf life when proper storage conditions are observed.
Store Glow Core in a clean, dry area away from moisture and sunlight.
Glow Core is standard with a 2.0% flux core for tin-lead (2.5% flux core for lead-free) alloys.
Glow Core is available in Sn/Pb, Sn/Ag/Cu, SN100C
Standard spool sizes: ½ lb. for .010 and .015 diameters, and 1lb. for .020, .032, .040, .050 and .062 diameters.
Packaging of ½ lb. and 1 lb. spools is available in 12 lb. and 24 lb. cases.
Other flux percentages, alloys, diameters and spool sizes may be available upon special request.
370° - 425°C (700° - 800°F) for Sn/Ag and Sn/Ag/Cu (SAC305, SAC405, CASTIN, etc.) alloys.
joint being worked.
applicator capable of dispensing precise amounts of flux to eliminate over-saturation and excessive spread.
Do not freeze this product.
Use with adequate ventilation and proper personal protective equipment.
Refer to the accompanying MSDS for any specific emergency information.
Do not dispose of any hazardous materials in non-approved containers.
- Wide Process Window
No-Clean Cored Wire Solder
Glow Core
- Cleanable with Saponifier
®
alloys.
- Lead-Free Compatible
14050 Summary of contents
Page 1
Features: - Excellent Wetting - Wide Process Window Description: Glow Core is a no-clean, resin-based flux cored wire solder designed to offer excellent wetting characteristics and lead-free compatibility. This product is very active and is recommended for fast cycle time ...
Page 2
Reference IPC-TM-650 method 2.6.3.3. §5.5.1 J-STD-004 §3.2.4.5.1 IPC-TM-650 method 2.6.3.3. §5.5.2 Conclusions The result of the qualification test indicates that Glow Core wire solder complies with the requirements of IPC TM- 650, Method 2.6.3.3 for Surface Insulation Resistance. Test Data ...