5202 AIM - American Iron and Metal, 5202 Datasheet - Page 2

• Manufacturer Part Number: 5202
• Description: Solder, Fluxes & Accessories SN100C BAR TRIANGLE 2.5 lbs. BAR SOLDER
• Manufacturer: AIM - American Iron and Metal

Specifications of 5202

• Description/function: Lead Free Bar Solder
• Alloy: SN100C
• Weight: 2.5 lbs
• Product: Lead-Free Solder
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Safety:
The information contained herein is based on data considered accurate and is offered at no charge. Product information is based upon the
assumption of proper handling and operating conditions. All information pertaining to solder paste is produced with 45-micron powder.
Liability is expressly disclaimed for any loss or injury arising out of the use of this information or the use of any materials designated. Please
refer to
Material Property
Melting Temperature [°C]
S.G.
Specific Heat [J/Kg･K]
Thermal conductivity [J/m･s･K]
Vickers Hardness
Tensile strength [M･Pa]
Elongation [%]
Electrical resistance [µΩm]
Coefficient of Thermal
Expansion
Spread Factor %
Copper erosion rate at 260°C
Thermal shock
Electromigration
Whiskers
-
-
-
Americas [phone] · Europe [phone] · Asia-Pacific [phone] · [e-mail] · www.aimsolder.com
http://www.aimsolder.com/terms.cfm
Use with adequate ventilation and proper personal protective equipment.
Refer to the accompanying MSDS for any specific emergency information.
Do not dispose of any hazardous materials in non-approved containers.
Slow cooling
Fast cooling
130-180°C
80-130°C
30-80°C
240°C
250°C
260°C
280°C
Manufacturing and Distribution Worldwide
to review AIM's terms and conditions.
AIM
>1,000 cycles
Liquidus 227
Solidus 227
~ 2 minutes
>1,000 hrs
>1,000 hrs
SN100C
1.33x10
1.46x10
IS
1.38x10
ISO9001:2000 C
16.1
12.9
0.13
220
7.4
64
32
48
77
77
78
78
-3
-3
®
-3
ERTIFIED
Conditions: Load:10.0grams, sample ; Almina (20mm),
Ramp rate for different thermal analysis 20°/min
Time for complete erosion of 0.18mmΦ wire
Programmed temperature:10 /min.
S.G. measuring apparatus 25°
40° 95%RH & 85° 85%RH
For Terminal method (25°)
Cast onto aluminum plate
Cast onto insulating brick
-40/+80° each 1hr
10mm/min. (25°)
10mm/min. (25°)
Estimated value
Estimated value
Test method
JIS Z 3197
50º
09/09
Rev 4